Install Instructions for TracRac Ladder Rack Base Rails

Question

Question:

Do you have some instalation instructions? I need to remove and install some rails. Thanks

asked by: Tim

0

Expert Reply:

The base rails part # TH21610 are part of the TracRac Ladder Rack part # TH43002XT-610 which I attached a link to the install instructions for on this page.

expert reply by: Jameson C

0

Answer 1

Just like the BAK Revolver X2, the Revolver X4 (only difference between the two is the sheen on the tarp) is also compatible with the Thule TracRac SR Truck Bed Ladder Rack you'd looked at, part #TH43002XT-501. As you can see in the provided…

view full answer...

Answer 2

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 3

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Hey Chad, so I'd actually recommend a mid size ladder rack like the Yakima OutPost HD Overland Truck Bed Rack #Y01152-58. This is by far going to be your best bet if you don't want to trailer your kayaks. These bars have a 500 lb weight…

view full answer...

Answer 7

Hey Chris, Because the Thule TracRac TracONE Truck Bed Ladder Rack #TH27000XTB clamps to the lip of the bedrails it won't be compatible with any tonneau cover. You would need Thule's stake pocket mounted version the TracRac SR #TH43002XT-508…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

I recommend the Redarc Tow-Pro Elite Brake Controller for Tekonsha Harness item #RED63RR. This brake controller and harness will install inside your Silverado without cutting or splicing wires using the Tekonsha Plug-In Wiring Adapter item #3064-P.…

view full answer...

Answer 10

Yes Joseph, the B&W Custom Mounting Brackets for Patriot 5th Wheel Above Bed Base Rails #BWRVR2504 will work fine with your 2023 Chevrolet Silverado 1500 ZR. To complete the rail kit however, you are also going to need the B&W Universal Base…

view full answer...

Answer 11

Hey Gregg, The etrailer Hard Tonneau Cover #e23DR mounts to the inner lip of the bedrails with clamps so you'll need access to that lip in order to install it. If your bed liner is plastic you can just cut out holes where the clamps sit in order…

view full answer...

Answer 12

We do have the panels separately. What you're looking for is the Go Power Overlander Expansion Kit - 200 Watt Solar Panel #34282182.

view full answer...

Install Instructions for TracRac Ladder Rack Base Rails

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching