Dimensions for Draw-Tite Max-Frame Trailer Hitch Receiver # DT72MR For Mounting On a MB 2023 GLA 250

Question:

I dont see a trailer hitch listed for a 2023 Mercedes GLA 250. But there is one for 2022 and older. Wouldnt it fit the new 2023 since it doesnt seem there has been any major changes to the vehicle from 2022 to 2023?

asked by: George

Helpful Expert Reply:

While Draw-Tite has not been able to test the fit of their Max-Frame Trailer Hitch Receiver # DT72MR on a 2023 Mercedes-Benz GLA 250 I did take some measurements which you can use to verify if the mounting points are the same. The mounting holes are spread 37-3/16" on center from left frame rail to right. The oval holes are spread 3-1/8" apart on center with the round hole closest to the front of the vehicle being 2-1/8" from the center of the oval hole. The end of the receiver tube measured 5-1/8" from the height of the mounting points on the frame. I have created an image for you to see these measurements and you will find the installation instructions linked below which you can use to verify there are no differences between the GLA it was installed on and your 2023.

expert reply by: Bud M