bing tracking image
Summer Starts Here - Save up to 70%
SAVE NOW
Customer Service My Orders
Q & A Icon

Replacement Hub/Drum and Brake Assemblies for AL KO 4,400 lb Trailer Axle  

Question:

I have a 2014 keystone sprinter 252fwrls and the part number on my brakes is a 023-026 which is for 3500lb axles and my axle tag says 4.4k. Your website shows the correct brake assembly as K23-462-00 so Im confused at this point. But I need brake assembly and seals or brake assembly and full hub and bearings

0

Expert Reply:

While your pictures do indicate that you have an AL KO 4,400 lb axle the actual brake assemblies you have is a Dexter 3,500 lb assembly part # 23-26 or for the pair # 23-26-27.

When it comes to replacing your hubs, based off some previous answers it looks like the Trailer Hub and Drum Assembly - 5,200-lb Axles - 6 on 5-1/2 Item # 8-201-5UC3 could be the right replacement for you, but you will want to confirm which bearings are in your existing hubs. This is the most reliable way to determine which replacement hubs will fit on your spindle; if the bearings you find have part # 25580 for the inner and # LM67048 then this hub and drum assembly will work. The bearing kit that would work in these hubs is the Bearing Kit, LM67048/25580 Bearings, 10-36 Seal # BK3-300, which is just the bearings and seals if you don't want to replace the entire hub and drum.

expert reply by:
0
Jameson C
Brake Assembly Back
Brake Assembly Back
(click to enlarge)
Axle Tag Sticker
Axle Tag Sticker
(click to enlarge)
Ask The Experts a Question >>

Products Referenced in This Question






Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>