Adapter to Go From Demco Excalibur Tow Bar to Blue Ox Base Plate Kit

Question

Question:

I need adapter for Demco rv hitch to the car. i think it is a Blue ox on the jeep. As you can see on the picture the single tab on the RV is spreading the fork on the car adapter. Do you have the proper adapter?

asked by: Terry

0

Expert Reply:

The adapter you need to go from your Demcoo tow bar to your Blue Ox base plate kit is the part # DM9523041.

expert reply by: Jameson C

0

Blue Ox Base Plate
(click to enlarge)

Demco Tow Bar
(click to enlarge)

Answer 1

A 2020 Chevy Equinox can't use a standard diode kit like the #RM-154 and would instead need smart diodes like the #RM26FR (incandescent) or #RM38FR (LED). These vehicles have variable voltage wiring so using a standard diode wouldn't…

view full answer...

Answer 2

You'll need an adapter, but Blue Ox base plates are compatible and will work with the Demco Commander II Non-Binding Tow Bar #DM9511012. For the adapter what you will need is the Demco Tow Bar Adapter for Blue Ox Base Plates #DM9523041.

view full answer...

Answer 3

The Roadmaster Even Brake Portable Supplemental Braking System - Proportional #RM-9400 will work with a motorhome that uses air brakes. The signal from your brake lights will still produce the signal needed and the Even Brake uses that internal…

view full answer...

Answer 4

We do not have any particular installers that we recommend where you live in Indiana. With that being said a local mechanic with experience or an RV dealer with a service department should be able to install the SMI Air Force One Braking System…

view full answer...

Answer 5

Yes it sure is! The Demco Tow Bar Adapter for Blue Ox Base Plates #DM9523041 is absolutely compatible with your Demco Commander tow bar as well as your base plates. I have added a link to a video review for you if you'd like to check it out…

view full answer...

Answer 6

I forwarded this to our contact at Demco and what they responded with is below. The short answer is you should already have all of the parts you need: The baseplate for the 2018 Chevy Equinox ( #DM9519332) is the Demco tabless baseplate. The 2015…

view full answer...

Answer 7

There are a couple of options for wiring kits depending on whether or not your 2020 Chevy Equinox has LED or incandescent lights. For LED Tail Lights: Roadmaster Smart Diode 7-Wire to 6-Wire Wiring Kit for Variable Voltage LED Tail Lights item…

view full answer...

Answer 8

The two part numbers represent the same tow bar which is the Demco Excalibur Victory Series. The part #DM9511013 replaced the 9511009 a while back.

view full answer...

Answer 9

On the Jeep Wrangler and Jeep Truck models the steering wheel does not actually lock with the ignition in the off position, it just has a loss of power steering-which is likely what you're experiencing. Jeep removed the steering wheel lock from…

view full answer...

Answer 10

Yes the 10,500 lb weight capacity of the Demco Excali-Bar III part #DM9511013-BX would easily be enough for a 3/4 ton GMC truck. Your truck is going to be considerably lighter weight than that. If you let me know year of your truck I can recommend…

view full answer...

Answer 11

In order to tow your 2021 Jeep Cherokee Trailhawk with the Excali-bar Tow Bar #DM9511013-BX, use Blue Ox Base Plate Kit #BX1128, this is confirmed to fit your vehicle. You will also need the Blue Ox Base Plate Adapter Brackets #BX88310, which will…

view full answer...

Answer 12

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Adapter to Go From Demco Excalibur Tow Bar to Blue Ox Base Plate Kit

Product Page this Question was Asked From

Continue Researching