Replacement Mounting Hardware For Aries Grill Guard On a 2008 Chevrolet Silverado 1500

Question

Question:

WILL IT FIT A 2008 CHEVY 1500

asked by: Alex R

0

Expert Reply:

The Replacement Mounting Hardware Kit # AABRKT-9047 you found is for a Aries Grille Guard # AA9047 which fits the 2005 - 2021 Nissan Frontier or 2005 - 2007 Nissan Pathfinder. If you have the Aries Grille Guard # AA4068 which fits your 2008 Chevrolet Silverado 1500 you will need the Replacement Hardware Kit # AABRKT-4068.

expert reply by: Bud M

0

Answer 1

If you are talking about a Grille Guard like part #40-0085 or #45-0080, which fit your 1994 Chevy K1500, then the replacement mounting hardware and brackets that you need come in the kit #40-008PK. Please note that mounting hardware and grille guards…

view full answer...

Answer 2

The Replacement Mounting Hardware #AABRKT-9047 you found is for the Aries Grille Guard #AA9047 which fits a 2005 - 2021 Nissan Frontier or 2005 - 2007 Nissan Pathfinder. We do not have any components for a push bar for your 2013 Chevrolet Impala…

view full answer...

Answer 3

If you have the Westin Sporstman for your 2004 Yukon XL 1500 then you have part #40-0335. The replacement mounting hardware then is #40-033PK. Keep in mind the Sportsman will not fit your Yukon XL if it's a Denali model.

view full answer...

Answer 4

Thanks for including a picture! It looks to me like you have the Westin Sportsman Grille Guard, #40-0085. For this grille guard you would use Replacement Mounting Kit, #40-008PK, for your 1999 Chevrolet Tahoe.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 12

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Replacement Mounting Hardware For Aries Grill Guard On a 2008 Chevrolet Silverado 1500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching