How to Hardwire a 2008 Honda Civic Using Tow Ready Kit part # 119175KIT

Question:

can you please send a diagrahm if available or explain how to wire this product to vehicle thank you.

asked by: nick

Expert Reply:

There are 5 wires that will need to be wired to your 2008 Honda Civic at various place using the # 119178KIT. The White wire will need to be attached to a ground point. The other 4 wires, you will use your circuit tester, like the # PTW2993, to find out what goes where.

You will disconnect the plugs from the back of your driver and passenger side taillight assemblies. Next test the pins on the plugs that connect to the tail lights to find what wire does what. The Brown wire on the kit is for the tail lights when you turn on your headlights. The Yellow wire is driver side turn signal. The Red wire is for the brake lights. The Green wire is the passenger side turn signal.

I will include a link to a video installing this part on a different vehicle. It should give you an idea of the process as a whole.

expert reply by: Patrick B