Recommended Electric Over Hydraulic Disc Brake Kit For Triple Axle Enclosed Car Hauler
Question:
Hello, I have a Sundowner 40GN. It is a tri axle with 7,000 lb Lippert torsion axles. I am looking at installing Hydrastar Disc Brake Kit w/ Actuator for Triple Axle Trailers - 13 Hub/Rotor - 8 on 6-1/2 - 7K Is that the right brake kit for that and will there be enough clearance between the frame and the tire? Thanks for your help.
asked by: Kevin
Expert Reply:
The HydraStar Disc Brake Kit item # HSE7K-TR1 can be used with triple axle trailers with 7,000 lbs Lippert Torsion Axles.
This kit is specifically made for 7,000 lbs axles and has every component you will need to complete your conversion. The hubs have an 8 on 6-1/2" bolt pattern. I have linked an installation video below so you can see the process.
I confirmed with my rep at HydraStar, this kit will fit 16" wheels.
The HydraStar Disc Brake kit uses a hub/rotor combination so your off set will stay the same as opposed to kits that use a rotor that slides onto a separate hub. You should have the same amount of clearance between the frame and the tire.
To confirm this will fit your axles you should verify that you have Inner Bearing item # 25580 (1.75" inner diameter), Outer Bearing item # 14125A (1.25" inner diameter) and a Grease Seal item # GS-2250DL (2.25" inner diameter). If you have the axle serial number or information from the axle tag I can verify that you do have all the correct components.
Products Referenced in This Question
Replacement Trailer Hub Bearing - 14125A
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 14125A
- Race 14276
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- TruRyde
more information >
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Grease Seal - Double Lip - 2.250" ID - 3.376" OD - GS-2250DL
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.250 Inch I.D.
- 3.376 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
Hydrastar Disc Brake Kit w/ Actuator for Triple Axle Trailers - 1/2" Studs - 8 on 6-1/2 - 7K
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 8 on 6-1/2 Inch
- Hub and Rotor
- 1/2 Inch Studs
- 7000 lbs Axle
- Hydrastar
more information >
Continue Researching
- Q&A: Triple Axle Disc Brake Conversion Kit
- Q&A: Are the MORryde Wet Bolts Compatible With Equa-Flex Equalizers on 2018 Momentum 395M?
- Q&A: How To Run Steel and Rubber Lines For Disc Brakes In Trailer
- Q&A: What is the Difference Between the HSE7K-TRI and HSE7K-TR1SO
- Q&A: Hydraulic Brake Kit For a Ez 4 Kaufman Car Hauler Trailer With 7,000LB Axles
- Q&A: Parts to Convert 2017 Grand Design Momentum 376TH to Electric Over Hydraulic Disc Brake
- Q&A: Recommended Brakes, Bearings and Seals for Dexter 10k General Duty Axle
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class