Replacement U-Bolt Kit For Sears X Cargo Box

Question

Question:

Hello, do you guys have any ubolt kit they will fit a sears x cargo? The center of each hole seems to be 75.2mm or about 3 in. Thank you

asked by: Aaron

0

Expert Reply:

Per Thule the correct replacement U-Bolt kit that you will need is The SportRack Replacement Hardware Kit for Explorer and SkyLine XL Roof Mounted Cargo Boxes # SR05587.

This kit contains the U-Bolts and all the replacement hardware that you will need.

i attached a review video link below.

expert reply by: Noah E

0

Answer 1

Yes, the U-Bolts that come with the Replacement Mounting Hardware for Car Top Cargo Roof Cargo Box #CTC-18PARTS have a 3/16" diameter and are spaced 4" apart on center. I have attached some photos to demonstrate this and some…

view full answer...

Answer 2

We have replacement mounting hardware for a Sears Sport SP-20SV cargo box, but the Replacement Mounting Hardware for Car Top Cargo Roof Cargo Box #CTC-18PARTS is only a fit for the Trunx Rooftop Cargo Box #TRX34FR. The correct mounting hardware for…

view full answer...

Answer 3

I am not aware of any direct fit mounting hardware kits available for the Sears X Cargo Roof Mounted Cargo Boxes due to their age. As you mentioned, you will need to drill holes in order to mount it onto a set of crossbars. The u-bolts kits are…

view full answer...

Answer 4

While the Replacement Mounting Hardware for Car Top Cargo Roof Cargo Box #CTC-18PARTS that you mentioned has not been tested by the manufacturer to work with other brands as it is designed to work with the no longer available Car Top Cargo Rooftop…

view full answer...

Answer 5

We have previously confirmed with Thule (the manufacturer of this cargo box) that the correct replacement mounting hardware for your Sears X-Cargo 28-7271 is the Replacement Hardware Kit #SR05587 which does include the U-bolts required for this cargo…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Replacement U-Bolt Kit For Sears X Cargo Box

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching