Trailer Hitch For A 2022 Hyundai Tucson N Line
Question:
Why does this say not for the N line? And what hitch can I put on a 2022 Tucson N line? Thanks!
asked by: Matthew P
Expert Reply:
We have the perfect trailer hitch that is confirmed to fit your 2022 Hyundai Tucson N Line! The Draw-Tite Max-Frame Trailer Hitch # DT22MR will not fit because your N Line model is outfitted with styling and performance upgrades that set them apart from standard trims. So it will not bolt up correctly.
The Curt Trailer Hitch Receiver # C94WR has a bolt-on installation with no welding required. It has a gloss black powder coat finish that is over a protective base coat that offers superior rust resistance. It is confirmed to fit your N Line model.
The trailer hitch has a maximum gross trailer weight up to 3,500 pounds and has a maximum tongue weight up to 525 pounds. I would recommend checking your vehicle's manual to find out the proper towing capacity for your vehicle.
The Curt wiring harness # CU94FR plugs into your vehicle's wiring harness, which is located behind the driver's-side interior trim panel in your rear cargo area. Once installation is complete, the 4-way flat connector will be stowed in an out of the way location within the rear cargo area.
The Curt Towing Starter Kit for 2 inch Hitches # C45554 includes an 8-1/4 inch long, powder coated ball mount with a pre-torqued hitch ball; hitch pin and clip; hitch receiver lock with keys; hitch cover; and a storage case.
I attached a review video link below.
Products Referenced in This Question
Curt Towing Starter Kit for 2" Hitches - 2" Ball - 2" Rise, 4" Drop - 7.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 2 Inch Ball
- One Ball
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 4 Inch
- Rise - 2 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- CURT
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Bearings and Seal Used for AL-KO 7290 Trailer Hubs for #99 Spindles
- Q&A: Installing a Brake Controller and a 7-Way Trailer Connector on a 2005 Ford F-150 With Factory 4-Way
- Q&A: What is the Fuse Rating and Power Wire Gauge Used for Trailer Wiring Harness # 118571
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Replacement 7-Way Wiring Harness for 2005 Ford F-150 with Factory Tow Package
- Q&A: Oil Seal for 10K Quality Axles with Seal 27438
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Trailer Hitch Receiver and Wiring Harness For 2023 Kia Sportage
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Replacement Automotive Lighting
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: The Differences Between Cam Buckles and Ratchet Straps (And Who Would Win In a Fight)
- Article: My Trailer Hitch Doesn't Fit
- Article: Trailer Wiring Diagrams