Locking Shock Absorbing Ball Mount With 3 Ball Sizes And a 4 Drop
Question:
Looking at Convert-A-Ball hitch the heavy duty, 14,000 lb with 4" drop. Want the 3 ball set and locking pin that goes with it. I don't see the balls with a 1-1/4 shaft heavy duty and cant find the locking pin. Thanks
asked by: Ken D
Expert Reply:
I have a option for you as the Convert-A-Ball Interchangeable Ball Set # 902B for the Convert-A-Ball Ball Mount # AMSC4HD you found is only available in a 1" shank with a maximum capacity of 10,000lbs for the 2-5/16" ball.
The Curt Rebellion XD Shock Absorbing Adjustable Ball Mount # C83WR is rated for up to 15,000lbs and includes an adjustable 2" and 2-5/16" hitch ball. The ball mount is adjustable up to a 6" drop. You can lock this hitch using the InfiniteRule Lock Set # IR47FR. And if you need a 1-7/8" Ball # 19260 you can attach it to the Ball Platform # C28KR by adding the Bushing # F-2 to reduce it from 1-1/4" to 1".
Products Referenced in This Question
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 2000 lbs GTW
- Class III
- Draw-Tite
more information >
Convert-A-Ball Interchangeable Ball Set - 3 Balls - 1" Shank - Stainless
- Trailer Hitch Ball
- Trailer Hitch Ball
- Interchangeable Ball Set
- Stainless Steel
- 1-7/8 Inch Diameter Ball
- 2 Inch Diameter Ball
- 2-5/16 Inch Diameter Ball
- 2-1/4 Inch Shank Length
- 1 Inch Diameter Shank
- 10000 lbs GTW
- Class III
- Convert-A-Ball
more information >
Replacement Ball Platform for Curt Rebellion XD Adjustable Ball Mount
- Accessories and Parts
- Trailer Hitch Ball Mount
- Ball Platform
- CURT
more information >
Curt Rebellion XD Shock Absorbing Adjustable Ball Mount w/ 2" and 2-5/16" Balls - 15K
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- 2 Inch Ball
- 2-5/16 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gray
- Drop - 6 Inch
- Fits 2 Inch Hitch
- 15000 lbs GTW
- Shock Absorbing
- CURT
more information >
Hitch Ball Bushing - 1-1/4" to 1" - Zinc
- Accessories and Parts
- Trailer Hitch Ball
- Bushing
- 1-1/4 Inch to 1 Inch
- CURT
more information >
InfiniteRule Lock Set for Curt Rebellion XD Ball Mount - 2" and 2-1/2" - Stainless - Qty 3
- Accessories and Parts
- Trailer Hitch Ball Mount
- Locks
- Curt Rebellion XD
- InfiniteRule
more information >
Product Page this Question was Asked From
Convert-A-Ball Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop -14,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1-1/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 4 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 14000 lbs GTW
- Class IV
- Shock Absorbing
- Convert-A-Ball
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: Will the Ball Mount Adapter for Convert-A-Ball Cushioned Weight Distribution Shank Fit a Curt Shank
- Article: How to Install E-Track in 3 Easy Steps
- Article: How to Tie Down a Motorcycle
- Article: What To Look For When Buying Ratchet Straps
- Q&A: Does Active Calibration of Tow Pro Elite Occur if No Trailer is Connected
- Q&A: Anti-Rattle Recommendations for Convert-A-Ball Cushioned Ball Mount # AMSC4
- Q&A: How Wide of a Rim is Recommended for the Tire Size ST225/75R15
- Q&A: Will Ball Mount Adapter Work With Weight Distribution Shank
- Q&A: Distance Between Tangs on Convert-A-Ball AMCC2 Ball Mount
- Q&A: Can a Trailer Ride With the Tongue at an Upward or Downward Angle
- Article: How to Measure for Trailer Hitch Drop
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Trailer Hitch Receiver Sizes