bing tracking image
Q & A Icon

Is The MORryde X-Factor Crossmember Compatible With The MORryde Shock Absorbing Suspension Equalizer  

Question:

By the description it shows the MR49ZR MORryde X-Factor Crossmember for CRE, SRE, or Stock Leaf Spring Suspension - MR33WR will work with the MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35inch Wheelbase - 8K - MR27ZR . Is this correct? I will be installing it on a 2022 Imagine 2800BH.

0

Expert Reply:

Yes, the MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K # MR27ZR is a CRE style equalizer so it will be a compatible fit with the MORryde X-Factor Crossmember # MR33WR.

I highly recommend upgrading your shackle straps and switching to wet bolts as well while completing this installation. Since you'll have to remove the bolts currently holding your equalizer in place you'll already be doing half the work so it's worth it to slip in wet bolts that will make lubricating your suspension a breeze.

You can use part # MR46ZR if your shackle straps are 2-1/4" or part # MR76ZR if your shackle straps are 3-1/8" long. This measurement is from the center of one bolt hole to the center of the other bolt hole in the shackle strap.

Once your installation is complete you can lube the wet bolts with a grease gun like part # L30-310 and some grease # L11390.

expert reply by:
0
Kevin C

Products Referenced in This Question






Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>