Recommended Hook For Horse Trailer To Tie Up Horses

Question

Question:

Do you carry tie hooks to tie a horse for the outside of a horse trailer?

asked by: Jo A

0

Expert Reply:

I recommend using the Buyers Products Tie-Down Anchor # 337B2402AL as a tie down point for your horse trailer. This ring has an interior opening which is 2-1/8" long by 1-3/4" wide. The Mounting holes are spread 4" on center and the ring has a 800lb safe working load limit.

expert reply by: Bud M

0

Answer 1

Mounting hardware is not included with the Buyers Products 1/2 " Cast Aluminum Chain Loop #337B2402AL you referenced as the application of where you plan to install this will determine what type of hardware to use. A carriage nut and bolt is…

view full answer...

Answer 2

Yes. The etrailer 2-in-1 Exterior Windshield and Wiper Blade Cover - 70" Wide x 39-3/4" Tall #e98899 has been confirmed as a fit for your 2017 GMC Sierra 2500 Denali by our team. I've added a photo with detailed dimensions on this cover…

view full answer...

Answer 3

I have a hardware solution for you. While the CargoSmart X-Track Cargo Organizer #3481788-C does not come with screws, we do carry ones that will work great with the organizer. For wood screws, I recommend the Snap-Loc E-Track Wood Screws #SL49FR. If…

view full answer...

Answer 4

The mounting holes of the Buyers Products 1/2 " Cast Aluminum Chain Loop #337B2402AL that you referenced are 1/2 inch.

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 8

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 9

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 10

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 11

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 12

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Recommended Hook For Horse Trailer To Tie Up Horses

Product Page this Question was Asked From

Continue Researching