Bolt Pattern of Kwike 32 Series RV Steps

Question

Question:

the Kwikee series 32 steps have an 8x22 bolt pattern and after research i,m told that is the set i need. problem seems to be the bolt pattern on my old steps is 9x22

asked by: Frank M

0

Expert Reply:

The bolt pattern that is on the bottom of the Kwikee 32 Series Steps part # LC3722616 that you referenced is 22 inch by 8 inch but there are several bolt holes on the plate which might be why you are getting a slightly different measurement.

expert reply by: Jameson C

0

Bolt Pattern Dimensions
(click to enlarge)

Answer 1

The issue you described sounds like a faulty control module. In order to replace this you will want to use the Replacement Control Module for Lippert Electric Coach Step part #LC301702 which is a direct fit for your Lippert Steps 128980. I spoke with…

view full answer...

Answer 2

The correct part may be the solution. The Replacement Control Module for Lippert Electric Coach Step #LC301702 you asked from is not a Kwikee Step controller. The Lippert Components Kwikee Control Unit for pre-IMGL/9510 Step Control with switches…

view full answer...

Answer 3

The correct replacement control module for the obsolete Lippert Coach Step 128980 double retractable step kit is part #LC301702, according to the nice folks at Lippert. If you click the provided link, you can see a video product description of the…

view full answer...

Answer 4

From what you describe I suggest you examine the motor and gears as it appears they are worn. The Replacement Motor for Kwikee Revolution Series Electric RV Steps, #LC380073 is the correct part number. Or, for a complete replacement of Kwikee…

view full answer...

Answer 5

For the Kwikee double electric step assembly that measures 24 inches wide, the Kwikee 32 Series #LC372261 that you referenced is indeed the correct unit. I spoke with my contact at Lippert and the other 32 Series assemblies you mentioned, part…

view full answer...

Answer 6

You linked to the 24" Wide, 32 Series Kwikee RV Electric Steps, #LC3722616. For this, we have the Replacement Step Frame for Kwikee RV Electric Steps, #LC3722618. This is designed to work with your existing 32 series motor, control unit, and…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

I really appreciate all the information as well as the photos. After doing some research, I found that the exact replacement for your Kwikee steps with model number 903206000 are indeed the Kwikee 32 Series Electric RV Double Steps #LC372261. I also…

view full answer...

Answer 12

Hey Al, this is a great question but since you have free-backing plates now you would never need to mess with the manual lock out of your Atwood coupler.

view full answer...

Bolt Pattern of Kwike 32 Series RV Steps

Product Page this Question was Asked From

Continue Researching