Replacement Bearings, Races, Grease Seals and Retainers For a 3,500LB Axle On a 2015 Surveyor 264RKS
Question:
I have a 2015 Forrest River Surveyor model 264RKS, Two 3500lb axles, brakes on both. I want to repack the bearings. I need four grease seals for the repack and I want a spare bearing kit to keep while traveling. What part numbers do I need? Thanks.
asked by: David E
Expert Reply:
For your 2015 Forest River Surveyor 264RKS with tow 3,500lb axles you will need the Grease Seals # RG06-050. These are sold as a 2-pack for one axle so you will need 2 sets for your tandem axles. The Seal Puller # PTW1219 will help you to remove the old seals without risking damage to the bearings or races on your hub/drums. We do have replacement Tang Washers # 5-101 and Nut Retainers # 6-190 available if yours cannot be reused. Both of these will work with your Super Lube axle spindle but you will need to verify which retainer you may need.
For a spare set of parts the Bearing Kit # BK2-100 will contain both inner and outer races along with inner and outer bearings, a grease seal, tang washer and cotter pin. You will want to keep the 7-Piece Installation Set # PTW83020 with this kit so that you will be able to correctly install the new races without damaging them.
Products Referenced in This Question
Cotter Pin - 1/8" Thick x 1-3/4" Long
- Accessories and Parts
- Trailer Suspension Parts
- Cotter Pin
- ABS Fasteners
more information >
Replacement Spindle Washer - Tang Type for E-Z Lube
- Accessories and Parts
- Trailer Spindles
- Spindle Washer
- 1 Inch I.D.
- TruRyde
more information >
Replacement Nut Retainer for 6-191 Jam Nut
- Accessories and Parts
- Trailer Spindles
- Spindle Nut Retainer
- 1 Inch I.D.
- Dexter
more information >
7-Piece Installation Set for Bearings, Races, and Seals
- Accessories and Parts
- Trailer Bearings Races Seals Caps
- Tools
- Driver
- Performance Tool
more information >
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: What is the Best Grease for Trailer Bearings
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Bearing Kit Recommendation for 84 Spindle K71-717-00
- Q&A: Tips for How to Identify a Trailer Axle
- Q&A: Recommended U-Bolts And Plate For A 1-1/2" Wide Square Axle
- Q&A: Lug Nut Torque Chart for Trailer Wheels