Replacement Bearing Kit For a 2003 Forest River Cherokee Travel Trailer With Tandem 3,500LB Axles
Question:
There is no stamped numbers on old bearings. Using calibers to measure in fractions the inner seal ID 2 16/32inch the inner bearing ID is 1 3/8inch the outer bearing is 1 1/16. Could you direct me to a kit that would include the proper bearing and inner seal. I plan to replace all four wheel bearings. Thanks for any help.
asked by: Jerry A
Expert Reply:
It sounds like your 2003 Forest River Cherokee travel trailer has 3,500lb axles. The 3,500LB axle will commonly use an Inner Bearing # L68149(1-3/8" inner diameter), Outer Bearing # L44649(1-1/16" inner diameter) and Grease Seal # 58846(inner diameter 1.719", outer diameter 2.565"). These are all the parts used in our Bearing Kit # BK2-100. Each kit provides bearings, races, a grease seal, cotter pin and a tang washer for one hub.
The Seal Puller # PTW1219 and Install Set # PTW83020 will make swapping out your hub components much easier. I recommend using the LubriMatic LMX Industrial Strength Grease # L11390 with the new bearings. This grease has a superior formula that allows it to resist wear better in both hot and cold climates.
Products Referenced in This Question
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
- Lubricants Sealants Adhesives
- Grease
- Brake and Bearing Grease
- Standard Lithium Grease
- Lithium Complex
- 14 oz
- LubriMatic
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
7-Piece Installation Set for Bearings, Races, and Seals
- Accessories and Parts
- Trailer Bearings Races Seals Caps
- Tools
- Driver
- Performance Tool
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: What is the Best Grease for Trailer Bearings
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Bearing Kit Recommendation for 84 Spindle K71-717-00
- Q&A: Tips for How to Identify a Trailer Axle
- Q&A: Recommended U-Bolts And Plate For A 1-1/2" Wide Square Axle
- Q&A: Lug Nut Torque Chart for Trailer Wheels