Which Trailer Hub Dust Cover Fits 6k Lippert Axle with 6 Lugs

Question

Question:

have a 2021 Puma 32BHQS equipped with Lippert axles. My dust cover is the smaller one, it’s my understanding they only make 2 sizes. Forest River gave me this number 10F05377A, CAP, 6-LUG DUST, LUBED FOR 5200# and 6000# AXLES. I purchased one on Amazon B071L9X765 but it’s the larger one. Can you help me find the right one, I have pictures of the axle label and bar code. Thanks

asked by: Danny C

0

Expert Reply:

For a 5,200 lb trailer axle hub with 6 lugs the correct size dust cap/cover is 2.44 inches like the TruRyde cover part # DC250L-DCRP. Sounds like what you ordered was the version for the 8 lug hubs which is a slightly larger size.

expert reply by: Jameson C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 4

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

We can definitely help set you up with a tow package for your 2024 Kia Telluride. The main components you will need are a hitch, 7-way wiring harness, and a brake controller. You will need a good ball mount too, but it sounds like you have that…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

Hey Mark, thanks for reaching out! In order to get your 2024 Toyota Grand Highlander to function with the 5-Way on your trailer you'll need to install the Tow Ready 4 Pole to 5 Pole Trailer Wiring Adapter #20036. This plugs into your current…

view full answer...

Which Trailer Hub Dust Cover Fits 6k Lippert Axle with 6 Lugs

Product Page this Question was Asked From

Continue Researching