Custom Fit Trailer Hitch Receiver For a 2014 Scion iQ and Parts Needed For Towing a Trailer
Question:
Do you have any tow hitches to fit a scion iq 2014?
asked by: Sally J
Expert Reply:
The Curt Trailer Hitch Receiver # C11291 is custom fit for your 2014 Scion iQ. It will bolt on with no drilling required but, you may need to enlarge the access holes to get the square hole spacers to fit inside your frame.
I recommend installing the Upgraded Circuit Protected Tail Light Converter # 119178KIT when you install the receiver. This will give you a 4-way flat connector that can be used when towing most small trailers. It will also allow for Auxiliary Lights # C53201 if you are using a hitch mounted accessory that impairs the view of your tail lights.
For towing Curt recommends their 1-7/8" Euro Ball Mount # C45571 or 2" Euro Ball Mount # C45572 to match your trailer coupler size. A Curt Hitch Pin and Clip # F-4 will hold it in place while towing or you can use a Lock Set # 3794DAT to secure your trailer both to your Scion and when not connected.
Products Referenced in This Question
Tekonsha Tail Light Converter with 4-Way Flat Trailer Connector and Install Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- 1-1/2 Feet Long
- Universal Fit
- 4 Flat
- Tekonsha
more information >
Master Lock Trailer Hitch Receiver Lock and Coupler Lock Set - 1-1/4" and 2" Hitches
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Unique
- Fits 1-1/4 and 2 Inch Hitch
- Fits 1-1/4 Inch Hitch
- Fits 2 Inch Hitch
- Bent Pin
- 2 Inch Span
- Master Lock
more information >
Curt Class II Euro Style Drawbar with 1-7/8" Ball - 4-5/8" Rise - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- One Ball
- Steel Ball
- Steel Shank - Gloss Black
- Rise - 4 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
Curt Class II Euro Style Drawbar with 2" Ball - 2-5/8" Rise - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 2 Inch Ball
- One Ball
- Steel Ball
- Steel Shank - Gloss Black
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
Curt Auxiliary LED Indicator Lights
- Accessories and Parts
- Hitch Bike Racks
- Hitch Cargo Carrier
- Lights
- CURT
more information >
Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2-1/2" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- 2-1/2 Inch Long
- Fits 1-1/4 Inch Hitch
- 1/2 Inch Diameter
- 2-1/2 Inch Span
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 100 lbs TW
- 1000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Roadmaster Vehicle Specific Base Plates
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Can I Carry a 63LB E-Bike and a 25LB Bike With my 2022 Honda Civic?
- Q&A: Bike Rack Recommendation for a 2014 Scion iQ That Can Carry 57 lb Bike
- Q&A: Which Roof Rack Will Fit My 2014 Scion iQ Using 1547 Fit Kit?
- Q&A: Replacement Hub for Utility Trailer with Dexter 8-256 Hub
- Q&A: Does Curt Hitch # C11291 Fit 2012 Scion iQ
- Q&A: Trailer Ball Height to Increase Tongue Weight to Help with Sway Control on a Single Axle Fish House
- Article: How to Choose a Bike Rack for a Fifth-Wheel or Pop-Up Camper
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Q&A: Muffler is Touching Vertical Plate on Curt Trailer Hitch Receiver # C11265
- Article: My Trailer Hitch Doesn't Fit
- Article: Trailer Wiring Diagrams