Recommendation Between the CIPA and K-Source Custom Towing Mirrors for a 2020 Ram 1500

Question

Question:

Ive been looking at both the K-source and CIPA slip on mirrors.... Which of the two do you prefer, and why? Thanks!

asked by: Claude B

0

Expert Reply:

Between the CIPA Custom Towing Mirrors # CIP98MR and the K-Source Snap & Zap Custom Towing Mirrors # KS80730 for your 2020 Ram 1500, I prefer the K-Source Snap & Zap Custom Towing Mirrors # KS80730.

The reason I prefer the K-Source Snap & Zap Custom Towing Mirrors # KS80730 is because they just snap onto your mirrors with no additional hardware that that could get lost. They also feature cut-outs that allow for features your mirror may have (like turn signals) to still function.

expert reply by: Scott S

0

Answer 1

Yes, the CIPA Custom Towing Mirrors part #CIP98MR are a fit for a 2020 RAM 1500 Warlock.

view full answer...

Answer 2

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is…

view full answer...

Answer 3

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 4

Yes, the Thule TracRac SR Sliding Truck Bed Ladder Rack #TH57RV will fit your 2020 Ram 1500 with the 5'7" bed and no Ram box. Unfortunately, this rack is only available in the silver color. We do offer the TruXedo Elevate Truck Bed Rack…

view full answer...

Answer 5

A direct replacement for your Winntec Model 6020 is the Automatic Changeover RV LP Gas Regulator #37207-30395 as the BTU rating is compatible and they have the same fitting sizes.

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

The fan in the #PD4645V is temperature controlled so typically it does not run continuously. However, if there are heavy loads you can expect the fan to run non-stop. According to Progressive Dynamics, this can also happen if you're charging…

view full answer...

Answer 9

For a hard folding tonneau cover that is rack compatible on your 2023 Ford F-150 I recommend the BAKFlip MX4 Hard Tonneau Cover. You will need one of the following based on your bed length: -BAKFlip MX4 #BAK76FR (5-1/2' bed) -BAKFlip MX4 #BAK46FR…

view full answer...

Answer 10

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. Measuring is not required if you just take a look at your coupler and see where it attaches to…

view full answer...

Answer 11

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for…

view full answer...

Answer 12

I checked with Thule and they do offer a TracRac SR Cantilever ladder rack solution with the part #TH57RV for the ladder rack and then for the cantilever extension part #TH24002XT.

view full answer...