Where Should/Is the Main Circuit Board for HappiJac Camper Jacks Located

Question

Question:

Location of circuit board for Happijac in a Big Foot Trruck camper

asked by: Sherry

1

Helpful Expert Reply:

The Circuit Board for HappiJac Electric Truck Camper Jack Systems # LC733513 should be located inside the camper near the front bed wall. This is generally in the area of the main electrical panel.

I have included a picture of the main circuit board location instructions for the HappiJac camper jack systems.

expert reply by: Scott S

1

HappiJac Camper Jack Main Circuit Board Mounting Location Instructions
(click to enlarge)

Answer 1

Sounds like you need the Replacement Clutchless Motor Head for HappiJac Truck Camper Jacks - Qty 1 #LC759927. It is the exact replacement for the happiJac system motor head.

view full answer...

Answer 2

We have replacement legs for the HappiJack truck camper systems like the part #LC736515 which has 36-1/2 inches of lift and a 2,800 lb capacity as well as the #LC736514 which has 34-1/2 inches of lift and a 2,200 lb capacity but the legs themselves…

view full answer...

Answer 3

The Replacement Remote Control for HappiJac #LC723915 is the replacement remote compatible with the Replacement Circuit Board for HappiJac #LC733513. HappiJac has two remotes, one is compatible with the older circuit boards that have a 20 amp fuse.…

view full answer...

Answer 4

The mast of the Jensen Antenna #44US01R that you referenced can be easily removed by taking out the screw that attaches it to the base (see attached). The mast is actually rubber so I doubt it will do any damage to your cover if you fold it down,…

view full answer...

Answer 5

Yes, in order to set your trailer up for use with shore power you will first need an AC distribution panel. For this, I recommend a Progressive Dynamics Series AC Distribution Panel. In order to bring power into the panel you will also need a power…

view full answer...

Answer 6

The 15,000 Btu Furrion air conditioner is what I would recommend and what I have on my trailer. Since it is an enclosed trailer I'm guessing you want the manual distribution box. You can choose from the following based on color: -Furrion Chill HE…

view full answer...

Answer 7

Based on the available information for your 2022 Airstream Flying Cloud 30FB it looks like you have Dexter #11 Torflex axles. Assuming that is accurate, you need the Torflex Lift Kit - Tandem Axle - 2-7/8" Lift #K71-724-02. I recommend verifying…

view full answer...

Answer 8

Aside from the six 15A or GFCI power receptacles (5 interior and 1 exterior) and the breakers/fuses, we have all the parts you need to complete your project. For the power inlet on the outside of your horse trailer you can use the Epicord 30 Amp…

view full answer...

Answer 9

Yes the SmartPlug RV Power Cord #SM86FR that you referenced will stay flexible when the weather is cold. This would not get difficult to wrap up if the temperature was to drop.

view full answer...

Where Should/Is the Main Circuit Board for HappiJac Camper Jacks Located

Product Page this Question was Asked From

Continue Researching