Does Flash Solid Steel HD Adjustable Ball Mount Come With 8 Inch Rise/Drop
Question:
Does the Flash Solid Steel HD Adjustable 2-Ball Mount - 2.5 Hitch - 10 , 9 Rise - 20K Item # FA49-00-5925 come in a 8 version?
asked by: Cory
Expert Reply:
I'm not sure if you're looking for rise or drop but the # FA49-00-5925 is the closest to 8" for the Flash Solid Steel HD. The only other option would be on the low side which is # FA49-00-5625. This has a 6" drop and 7" rise. If you stick with the Flash Solid Steel HD then you can use the # FA86-00-4225 for a locking hitch pin and adjustment pin.
For an 8" rise/drop that fits a 2-1/2" receiver you could use the # FA42-00-2825. This has an aluminum shank with a capacity of 18,000 lbs for the 2-5/16" ball. If you would like a locking adjustment pin and hitch lock for this ball mount then you need the # FA86-00-3685 instead.
Products Referenced in This Question
Flash Simple Heavy Duty 2-Ball Mount - 2-1/2" Hitch - 8" Drop, 8" Rise - 18K
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- 2 Inch Ball
- 2-5/16 Inch Ball
- Two Balls
- Steel Ball
- Aluminum Shank - Silver
- Drop - 8 Inch
- Rise - 8 Inch
- Fits 2-1/2 Inch Hitch
- 18000 lbs GTW
- Class V
- Fastway
more information >
Flash Strong Solid Steel 2-Ball Mount - 2-1/2" Hitch - 6" Drop, 7" Rise - 20K
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- 2 Inch Ball
- 2-5/16 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 6 Inch
- Rise - 7 Inch
- Fits 2-1/2 Inch Hitch
- 20000 lbs GTW
- Class V
- Fastway
more information >
Fastway Trailer Hitch Lock and Adjustment Pin Lock Set for Flash E Series HD Ball Mounts
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Alike
- Steel
- Fits 2-1/2 Inch Hitch
- Flush Pin
- 3-5/8 Inch Span
- Fastway
more information >
Hitch Lock and Adjustment Pin Lock Set for 2-1/2" Flash Solid Steel HD Adjustable Ball Mounts
- Accessories and Parts
- Drop Hitch
- Trailer Hitch Ball Mount
- Locks
- Pins
- Fastway
more information >
Product Page this Question was Asked From
Flash Strong Solid Steel 2-Ball Mount - 2.5" Hitch - 10" Drop, 9" Rise - 20K
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- 2 Inch Ball
- 2-5/16 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 10 Inch
- Rise - 11 Inch
- Fits 2-1/2 Inch Hitch
- 20000 lbs GTW
- Class V
- Fastway
more information >
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Article: Steel vs. Aluminum Ball Mounts
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: Which Hitches are Made in the USA
- Q&A: Are Solid Shank Ball Mounts Better Than Those with a Hollow Shank
- Q&A: Comparing Forged and Welded Weight Distribution Shanks
- Article: Elevate Your RV Travel Experience with Harvest Hosts
- Q&A: Recommended 5th Wheel Hitch For A 2021 Ram 2500 With Puck System And Turning Point Pin Box
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Will Curt Class V Hitch # C15810 Fit a Ford F-250/F-350 With a Full Size Spare Tire
- Q&A: Overall Height of 2.5" Curt Adjustable 2-Ball Channel Mount While At Lowest Setting
- Article: Performance Chips and Modules
- Q&A: Do All Vehicle Tow/Recovery Straps Stretch
- Q&A: Why is My Vehicle Not Starting with the NOCO Boost # 329-GB40 Connected?