Replacement Brake Master Cylinder Kit for Titan Model 60 Drum Brakes

Question

Question:

Need to rebuild Surge brake system on my boat trailer which has a Titan Model 60 with drum brakes on a Dexter Axel year 2000. Was not sure which Master Cylinder and Wheel Cylinders I would need Many thanks

asked by: Timothy F

1

Helpful Expert Reply:

For a Titan Model 60 drum surge actuator the replacement master cylinder kit you'd need is the:

Replacement Master Cylinder Assembly for Titan Model 60 # T4395100

To pick out wheel cylinders I would need to know the brand of the current brake assemblies as well as the capacity of the axle.

expert reply by: Jameson C

1

Answer 1

You are correct that the Replacement Master Cylinder Assembly for Titan Model 60 and Aero 7500 Brake Actuators - Drum #T4395100 you were looking at is the replacement master cylinder for your older 23361. I included a video of the Titan #T4395100 for…

view full answer...

Answer 2

Your best route is to replace your entire surge brake assembly as Atwood no longer produces any parts for their brake actuators. The Titan Zinc-Plated Brake Actuator #T47457207K is going to be your best replacement available. It is specific to disc…

view full answer...

Answer 3

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 4

The DICO 189 you referenced is the older version of the Titan 60. You will want to replace the master cylinder with the Replacement Master Cylinder Assembly for Titan Model 60 and Aero 7500 Brake Actuators - Drum #T4395100. I've attached a video…

view full answer...

Answer 5

For your Titan Aero 6000 the correct replacement master cylinder is the part #T4395100 that you referenced and it comes with the piston inside of it as well.

view full answer...

Answer 6

The Titan 60ZX7000 brake actuator is a Model 60 actuator, and you do have the correct part for a replacement master cylinder: - Replacement Master Cylinder Assembly for Titan Model 60 and Aero 7500 Brake Actuators - Drum #T4395100 So this will work…

view full answer...

Answer 7

Unfortunately the Atwood 85736 cannot be replaced so you'd actually need an entirely new actuator. The closest replacement we have is the Demco Hydraulic Brake Actuator #DM72VR. This actuator has a gross towing weight capacity of 7,000-lbs, a…

view full answer...

Replacement Brake Master Cylinder Kit for Titan Model 60 Drum Brakes

Product Page this Question was Asked From

Continue Researching