Parts Needed To Upgrade Brakes On a 2021 Grand Design Reflection 28BH 5TH Wheel To Disc Brakes
Question:
I have a 2021 Grand Design 28bh and was thinking of upgrading the brakes to disks. What are all of the parts that I would need to do this upgrade? Also How would I know if my brake controller would work for this application?
asked by: Jeremy M
Expert Reply:
For your 2021 Grand Design Reflection 28BH 5th wheel you will need the following components.
Kodiak Disc Brake Kit # K2HR526D Qty 2
Inner Bearing # 25580 Qty 4
Outer Bearing # 15123 Qty 4
Grease Seal # GS-2125DL(2.125" inner diameter) or # GS-2250DL(2.250 inner diameter) Qty 4
Kodiak Hydraulic Brake Line Kit # HS496-252
Hydrastar Vented Marine Electric Over Hydraulic Actuator # HS481-8067
You will need to confirm the size of the grease seal used on your axle. If you can provide me with the serial numbers for your axles I can verify the correct size through Dexter for your axle. Also please let me know what brake controller you have and I can let you know if it is compatible with electric over hydraulic brakes.
Products Referenced in This Question
Replacement Trailer Hub Bearing - 15123
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 15123
- Race 15245
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Grease Seal - Double Lip - 2.125" ID - 3.376" OD - GS-2125DL
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.125 Inch I.D.
- 3.376 Inch O.D.
- etrailer
more information >
Grease Seal - Double Lip - 2.250" ID - 3.376" OD - GS-2250DL
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.250 Inch I.D.
- 3.376 Inch O.D.
- TruRyde
more information >
Hydrastar Vented Marine Electric Over Hydraulic Actuator for Disc Brakes - OEM - 1,600 psi
- Brake Actuator
- Electric-Hydraulic Brake Actuator
- 1600 psi
- Disc Brakes
- Hydrastar
more information >
Hydrastar Hydraulic Brake Line Kit - Tandem Axle - 25' Long, 3/16" Main Line
- Accessories and Parts
- Brake Actuator
- Trailer Brakes
- Disc Brakes
- Hydraulic Drum Brakes
- 25 Feet Long
- Brake Lines
- Steel Line and Flexible Hose
- Brake Line Kits
- Tandem Axle
- Hydrastar
more information >
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 5200 lbs
- 6000 lbs
- Brake Assembly
- 6 on 5-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Continue Researching
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Trailer Tire Sizing
- Q&A: Will The Kodiak Disc Brakes # KOD69FR Fit Load Rite Boat Trailer With 5,200LB Torsion Axles?
- Q&A: How to Determine Weight Capacity of Trailer Axle
- Q&A: How Do I Know If My 10k AL-KO/Hayes Brake Caliper Is For The Right Or Left Side Of A Trailer
- Q&A: What Actuator is Needed for Hydraulic Disc Brakes with 1,500 psi Rating Requirement
- Q&A: Can Regular Grease Trailer Hubs be Converted to Oil Bath Hubs
- Article: Trailer Maintenance Schedule
- Q&A: Brake Kit for Forest River Sandpiper 3440BH With 6,000 Pound Axles
- Q&A: Should Trailer Brakes Go On Front Axle or Rear Axle of Tandem Axle Trailer
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Most Popular Wheel Bearings