Parts Needed To Add Electric Over Hydraulic Disc Brakes to 2020 Grand Design Momentum 397TH
Question:
Afternoon Im looking at upgrading my drum brakes on my 2020 397th to disc brakes . will these Kodiak brakes work , ill also need the brake line kit and control pump. what else do i need ?
asked by: Jason S
Expert Reply:
The Kodiak Disc Brake Kit # K2HR8D11E58 is designed to fit 8,000 lb axles with a 4-bolt brake flange. Although the bearings will fit, your 2020 Grand Design Momentum 397TH has 7k axles with a 5-bolt brake flange so you will want a different disc brake kit. I recommend verifying this information to be sure.
Since you have a triple axle trailer, I recommend the Hydrastar Disc Brake Kit w/ Actuator for Triple Axle Trailers # HYD54FR. This comes with the disc brakes, the brake lines, and the Hydrastar electric over hydraulic brake actuator. Grease caps are sold separately. The only other thing you might need if you don't already have one is a breakaway like the # 50-85-313.
Since you currently have electric brakes you should already have a brake controller. If it is a factory brake controller it is possible you will need the # HBA-CAM for it to work properly. This depends entirely on the vehicle. If you have an aftermarket brake controller you want to make sure it is compatible with electric over hydraulic.
Products Referenced in This Question
Tekonsha Push-To-Test Trailer Breakaway Kit with Built-In Battery Charger - Top Load
- Trailer Breakaway Kit
- Kit with Charger
- Top Load
- Single-axle
- Tandem-axle
- Triple-axle
- LED Tester
- Tekonsha
more information >
Hydrastar Electric Over Hydraulic Actuator Adapter Module for Ford and Chevy Brake Controllers
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Adapters
- Hydrastar
more information >
Hydrastar Disc Brake Kit w/ Actuator for Triple Axle Trailers - 9/16" Studs - 8 on 6-1/2 - 7K
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 8 on 6-1/2 Inch
- Hub and Rotor
- 9/16 Inch Studs
- 7000 lbs Axle
- Hydrastar
more information >
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 11" Hub/Rotor - 8 on 6-1/2 - Raw - 5/8" Bolts - 8K Dexter Axle
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 8000 lbs
- Brake Assembly
- 8 on 6-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Hydrastar Disc Brake Kit w/ Actuator for Triple Axle Trailers - 9/16" Studs - 8 on 6-1/2 - 7K
- Shop: Kodiak Disc Brake Kit - 11" Hub/Rotor - 8 on 6-1/2 - Raw - 5/8" Bolts - 8K Dexter Axle
- Search Results: 916 lug nut
- Search Results: lug nuts
- Shop: Oil Cap, Plug and O-Ring for Dexter 7-9K Trailer Axles and DeeMaxx 8K Oil Bath Idler Hubs
- Shop: MORryde Shock Absorbing Suspension Equalizers for Triple Axle Trailers w/ 33" Wheelbase - 8K
- Video: Review of Hydrastar Trailer Brakes - Triple Axle Trailer Disc Brake Kit - HYD54FR
- Shop: Handrail for Second Generation 4-Step MORryde Steps
- Q&A: Can Hydrastar Disc Brake Kit for Triple Axles HYD54FR Use Oil Instead of Grease
- Shop: Hydrastar Vented Marine Electric Over Hydraulic Actuator for Drum Brakes - 1,200 psi
- Shop: Oil Cap and Plug for 7,000-lb to 8,000-lb HydraStar Disc Brake Kits - Qty 1
- Shop: Suspension Enhancement
- Video: Review of Air Lift Vehicle Suspension - Rear Axle Suspension Enhancement - AL76KV
- Shop: Fifth Wheel Hitch
- Q&A: Disc Brake Conversion for a 2014 Kaufman Mini 5 Car Trailer
- Search Results: 8000
- Q&A: Will An 8,000lb Dexter Hub Fit A # 42 Spindle
- Search Results: ap216
- Q&A: Converting 2016 Diamond C 10k Axle Trailer and Iron Panther 7K Axle Trailer to Disc Brakes
- Search Results: 8k axle
- Search Results: hyd54fr
- Q&A: What Brand Calipers Come with Hydrastar Disc Brake Kit w/ Actuator for Triple Axle Trailers
- Q&A: Parts Needed to Convert 9k Trailer Axles of Texas Pride Car Hauler to Electric Over Hydraulic
- Q&A: Disc Brake Kit that Fits Dexter Nev-R-Lube Trailer Hub # 008-402-90
- Search Results: disc brake kit