Is BTU Output The Same on Both Tanks Using Auto Changeover Regulator 37207-30395

Question

Question:

is the BTU output the same on booth the service tank and backup tank

asked by: Brian H

0

Expert Reply:

Yes, the BTU output is the same on both of your propane tanks when using the Automatic Changeover RV LP Gas Regulator # 37207-30395.

expert reply by: Kyle S

0

Answer 1

Since you're trying to do a decently large run you'd need to get two single stage regulators like JR Products High Pressure RV LP Gas Regulator #37207-30325 and connect them inline close to the tanks and then run them out to the Dual…

view full answer...

Answer 2

For your 30,000 BTU wall mounted heater you will need to use a dual-stage propane regulator. The correct regulator will be the MB Sturgis Vertical 2-Stage Propane Regulator - 11" Water Column Outlet #108220. You will need a vertical…

view full answer...

Answer 3

Essentially each regulator is going to give you an 11" WC (pressure rating) but the amount of BTU's (in this case we'll say fuel) can differ greatly. The JR Products Regulator #37207-30395 is giving you 345,000 BTU's per hour at…

view full answer...

Answer 4

To hook up two 100 pound propane tanks to your trailer, I would recommend the JR Products #37207-30395 Propane Regulator With Automatic Changeover. This part can supply 345,000 BTU of gas. The maximum inlet pressure is 100 PSI. I would just inventory…

view full answer...

Answer 5

To verify which regulator would be the best choice for your 2022 Outdoors RV Mountain Series Blackstone 280KVS you will need to verify exactly how many BTU's all of your propane appliances and accessories will require. Unfortunately, Outdoors RV…

view full answer...

Answer 6

I checked with JR Products to find out what the adjustment pressure range is for the Automatic Changeover RV LP Gas Regulator #37207-30395 and they sent me the attached graph.

view full answer...

Answer 7

Since at full load your 20 kw generator would consume 337,500 btu you'd need something rated higher than the Camco you mentioned and instead would want the part #37207-30395.

view full answer...

Answer 8

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 9

A direct replacement for your Winntec Model 6020 is the Automatic Changeover RV LP Gas Regulator #37207-30395 as the BTU rating is compatible and they have the same fitting sizes.

view full answer...

Answer 10

Yes, the Automatic Changeover RV LP Gas Regulator #37207-30395 will work to replace your Winntec 6020. This regulator uses the same sized fittings as your 6020 and the BTU rating of this is compatible.

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

Yes, the #100019-24 pigtail can be used to connect your dual-cylinder 100 lb propane setup to the regulator on your RV. Since this hose does not have a back-check to contain a gas leak, you will need the #204120-MBS fitting that includes a…

view full answer...

Is BTU Output The Same on Both Tanks Using Auto Changeover Regulator 37207-30395

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching