Measurement From Hitch Pin To Welded Tab On Shocker Hitch HD Air Ball Mount # SHK22VR

Question

Question:

Looking at buying SH-HD640-250-25-X2 I need to know what the distance is from the hitch pin holes to the vertical black section that is welded above the hitch shank. Need too be Sure I have sufficient clearance. I can forward a picture of what I’m referring too once you respond.

asked by: William R

0

Expert Reply:

The Shocker Hitch HD Air Ball Mount # SHK22VR has 2 hitch pin center holes that are spread 1" apart. This will give you either 3-1/2" or 4-1/2" from the hitch pin center hole to the vertical tab that is welded to the hitch tube.

expert reply by: Bud M

0

Measurement From Hitch Pin To Welded Tab On Shocker Hitch HD Air Ball Mount # SHK22VR
(click to enlarge)

Answer 1

Yes, we have the Drop Ball Attachment for Shocker Bumper Hitches with 2" Ball #SHK27ZR. This will work with the Shocker Hitch HD Air Ball Mount #SHK22VR you found giving you the 7-1/2" of drop you are needing. The Combo Ball #SHK89ZR…

view full answer...

Answer 2

I checked with Shocker hitch and they told me that from the hitch pin hole down to the bottom of the Shocker XRC Cushioned Adjustable Ball Mount #SHK34RR measures 8 inches.

view full answer...

Answer 3

The horizontal distance between the hitch pin hole and the tallest point of the Shocker Hitch Impact Max Cushioned Ball Mount #SHK34RR is 4-1/2" to the first hitch pin hole and 5-1/2" to the second hitch pin hole (see attached). I also got…

view full answer...

Answer 4

One option that might help is the Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers #325-GH-1024. This is a cushioned ball mount setup that basically gives the ball mount connection of the trailer suspension. This uses torsion springs to vertically…

view full answer...

Answer 5

The main difference between the #RAS3611 and #RAS3611-HD is the capacity. The regular system has a 2,000 lb weight capacity while the HD system is 3,000 lbs. I would choose the HD system for the additional support. The lowest tension setting on the…

view full answer...

Answer 6

This is not an uncommon situation for your generation of Chevy Silverado. If you remove the cover on the power distribution box, look for a row of larger fuses on the left side of the box (if facing the motor from the front of the truck). If there is…

view full answer...

Answer 7

The modern day equivalent of a 20.5 x 8-10 tire is going to be a 205/65-10. The dimensions are as close as you can get to the old size. We have several tires and tire and wheel combos in this size with various bolt patterns (if a wheel is needed).…

view full answer...

Answer 8

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Measurement From Hitch Pin To Welded Tab On Shocker Hitch HD Air Ball Mount # SHK22VR

Product Page this Question was Asked From

Continue Researching