Parts Needed to Flat Tow 2016 Ford Fiesta
Question:
I need all of the parts to set up towing a 2016 ford fiesta removable bars. Auto trans
asked by: Denny N
Expert Reply:
The first thing you need to flat tow your 2016 Ford Fiesta is a base plate kit like the Roadmaster Direct Connect kit part # RM-524441-5.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon All Terain, # RM-522. This has non-binding arms which makes the setup very easy to connect/disconnect.
For lighting/safety cables, locks, and covers for the tow bar we have the Roadmaster Falcon All Terrain kit part # RM-9243-1 which comes with all of that as one part number. The diode kit that comes with this allows you to splice into the taillight wiring so that your RV controls the vehicle taillights and does not require drilling into the taillight housings. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.
And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles. You'll also need the outlet kit part # RM-9332 to power this since your battery will need to be disconnected.
Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.
I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.
Products Referenced in This Question
Blue Ox Patriot Portable Flat Tow Brake System - Proportional
- Tow Bar Braking Systems
- Brake Systems
- Proportional System
- Recurring Set-Up
- Portable System
- Power Assist Brake Compatible
- Air Brakes
- Air Over Hydraulic Brakes
- Hydraulic Brakes
- Blue Ox
more information >
Roadmaster Direct-Connect Base Plate Kit - Removable Arms
- Base Plates
- Removable Drawbars
- Twist Lock Attachment
- Roadmaster
more information >
Roadmaster Accessory Kit for Falcon Tow Bars - Tail Light Wiring - Safety Cables - Lock Set
- Accessories and Parts
- Tow Bar
- Accessories Kit
- Falcon 2
- Falcon All Terrain
- Roadmaster
more information >
Product Page this Question was Asked From
Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord
- Tow Bar Wiring
- Splices into Vehicle Wiring
- Diode Kit
- Universal
- Tail Light Mount
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Must-Have Flat Towing Components
- Article: Trailer Wiring Diagrams
- Article: Roadmaster Vehicle Specific Base Plates
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Can the Curt Custom Tail Light Wiring Kit Be Used With LED Lights
- Q&A: Should There Be Any Gap Between The Roadmaster D-Ring Adapter And The D-Ring
- Article: Flat Towing Package for 2018 Jeep Wrangler JL and JL Unlimited
- Article: Tow Bar Wiring: Which Wiring Kit is for You?
- Article: How to Choose a High-Low Adapter
- Q&A: Will The Curt Dinghy Wire Harness # C96JR Interfere With Activation Of A Blue Ox Patriot
- Q&A: Possible Base Plate Installers Near Visalia CA
- Q&A: Does The Roadmaster Even Brake Monitor Have A Manual Brake Override Function
- Q&A: Does The Blue Ox Patriot Braking System Come With A Monitor To Display When The Brakes Are Activated
- Q&A: Parts Needed to Flat Tow 2023 Jeep Gladiator