Trailer Steps That Mount on Outside With 25-1/2 Inch Mounting Bracket & 25-1/2 Inch Entry Height

Question

Question:

Im looking for options for new steps. The mounting point for my current steps is 25.5 wide and currently have 24 wide 2 step...its a 2016 Evergreen Reactor 25FQS and we recently flipped the axles and lifted the trailer approx 6 and now we need a 3rd step to safely/easily get in /out. Recommendations appreciated. Doesnt look like there are tons of options but Id still love to know what experts would recommend. 26" door..and entry height is 25.5" when on level ground. It is a toy hauler and we pack stuff inside doorway so the steps that fold up inside are not an option. Thanks.

asked by: Steven S

0

Expert Reply:

Thanks for that info, and there is one option for steps that mount on the outside of your trailer, have a 25-1/2 inch mounting bracket, and work with an entry height of 25-1/2 inches, which are TorkLift scissor steps:

- TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear - 3 Steps # TLA8103

The # TLA8103 have a 25-1/2" wide x 13-7/8" deep mounting bracket, have adjustable legs with foot plates that touch the ground so the steps are always stable, and are made from aluminum and stainless steel so you never have to worry about the steps rusting.

expert reply by: Kyle S

0

Answer 1

Your toy hauler's ground to threshold and opening width dimensions of 25-1/2-inches are just within the mounting requirements for the 3-step TorkLift GlowStep Revolution Scissor Steps #TLA8103. This unit is designed to give an easy drop-in fit as…

view full answer...

Answer 2

I spoke with the manufacturer to ensure the measurements were correct and found that the chart on the page for #LC432690 is incorrect. It does require 27-1/2" of space for the mounting brackets. Both the #LC432690 and #LC432696 will be too big…

view full answer...

Answer 3

The mounting bracket spacings are an industry standard, so when we see our neighbors measure within 1/8"-1/4" of this industry standard we can usually narrow down what they have. The brackets sometimes have some movement in them and…

view full answer...

Answer 4

The SoftStartRV Soft Start for RV AC Units part #SSR54FR is universal, meaning it will work with all RV air conditioners. There are specific wiring diagrams for each type of A/C unit. I have attached a sample install video for you but you may need to…

view full answer...

Answer 5

The Mighty Cord Replacement RV Power Inlet - Twist Lock - 30 Amp - White #A10-30INVP has a removable cover to protect the wire connections so I've measured the depth of the outlet with the cover on and off (pictured below).

view full answer...

Answer 6

Once it's disassembled, once you access the rear of the socket you'll see that it's color coded as shown in the provided photo. The corresponding plug, like #A10-30FDT would wire in the same manner. The screws on each terminal are color…

view full answer...

Answer 7

I went out to the warehouse and took some measurements of the top of the Ultra-Fab Slide-Out Supports, #UF19-960002. The inside width is 4-3/4 inches. The outside width is 5 inches. The height is 1-3/8 inches and the front to back measurement is…

view full answer...

Trailer Steps That Mount on Outside With 25-1/2 Inch Mounting Bracket & 25-1/2 Inch Entry Height

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching