bing tracking image
Q & A Icon

Weight Distribution Shank Needed For a 6" Drop With a Fastway E2 Trunnion Weight Distribution Hitch  

Question:

I intend to buy the FA 9200-0450 .. Im wondering if the shaft of the FA 92 00-0450 is long enough. When both the trailer and vehicle are leveled these are the measurements. From the ground to the top of the receiver hitch of my jeep is 22-1/2 From the ground to under the coupler of the trailer its 17-1/2 which is a 5 inch difference What would you suggest . Thank You

1

Helpful Expert Reply:

To level your trailer using the Fastway e2 Weight Distribution # FA92-00-0450 you will need to replace the shank that comes with the hitch system with the Shank # EQ90-02-4300. This shank is capable of a 6" drop while the shank that comes with the hitch will only give you up to a 2" drop.

You will need a 2" Hitch Ball # 40038 to match your coupler.

expert reply by:
1
Bud M

Products Referenced in This Question



Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>

^

Recently Viewed Products

About Us
photos and videos
1,056,204
Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570
Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511
Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+
Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
78
Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357
Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.