Hidden Front Hitch Receiver Recommendation for a 2019 Chevy Silverado 2500

Question

Question:

Looking to add a front hitch receiver for 2019 Silverado 2500 but hoping to find one that doesnt set below the bumper but rather requires being cut through the bumper. Picture shows the Curt model which I think is too low for both aesthetics and function.

asked by: Roger F

0

Expert Reply:

For your application I recommend using the EcoHitch Invisi Front Mount Trailer Hitch Receiver # 306-X7906. This will fit in a cutout you make on the front bumper of your 2019 Chevy Silverado 2500 and it comes with a magnetic license plate mounting bracket so you're able to easily add/remove it as needed.

Attached is an installation video for you to check out.

expert reply by: Jon G

0

EcoHitch Invisi Front Hitch Installed on 2019 Chevy Silverado 2500
(click to enlarge)

Answer 1

The EcoHitch Invisi Front Mount Trailer Hitch Receiver #306-X7906 that you referenced does have the hitch opening height at the same height as the current license plate height. This is why this comes with a license plate bracket that fits into the…

view full answer...

Answer 2

Draw Tite has a front hitch that fits your 2018 Chevy Silverado 3500 with the part #65078 which has a vertical load limit of 500 lbs or we have the EcoHitch part #306-X7906 which is actually rated for 1,000 lbs. Either of these would work really…

view full answer...

Answer 3

I confirmed with EcoHitch and their Trailer Hitch Receiver #EH39FR was just confirmed to fit your 2024 Tesla Model Y this week. This is great since the receiver opening is accessible through the rear cover plate just like a factory option.

view full answer...

Answer 4

To add a hitch to your 2024 Toyota RAV4 Prime, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and…

view full answer...

Answer 5

Yep, you're 100 percent correct. For your 2015 Chevy Silverado 2500, the correct EcoHitch front hitch is indeed the one you referenced, which is the following part number: - EcoHitch Invisi Front Mount Trailer Hitch Receiver #306-X7906

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

If you check out the picture I attached you can see how the wires of the Ram jack switch #EJ-3520-PSW are supposed to be ran to it.

view full answer...

Answer 8

The EcoHitch Invisi Front Mount Trailer Hitch Receiver part #306-X7906 is the front mount trailer hitch I recommend for a 2019 Chevrolet Silverado 2500 because it is made in the USA and it installs inside the bumper so it won't hang down below…

view full answer...

Answer 9

I do not have a completed installation photo nor did EcoHitch, but I can provide a photo showing where the receiver tube will sit in relation to the bumper. You'll need to make a hole in the fascia under the bumper directly behind where the front…

view full answer...

Answer 10

You can use the RV Propane Gas Detector #RS64FR to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 11

The RV Propane Gas Detector part #RS64FR for white or part #RS44FR for black is what I recommend using to replace the the Atwood RV Propane Gas Detector part 31013 (Discontinued). The mounting plate for this new detector will cover up any holes you…

view full answer...