Spare Tire Carrier For A 2023 Aluma 548 ES Trailer

Question

Question:

I have a 2023 Aluma 548 ES Trailer, I purchased the 13inch spare, but the dealer does not stock the vertical mounting bracket. Do you have one in stock and do you have a part number that I can order. Thank you,

asked by: Dwayne

0

Expert Reply:

The Offset Trailer Spare Tire Carrier by Dutton-Lainson # DL22120 will work with your 13 inch spare tire for your 2023 Aluma 548 ES Trailer.

The carrier has a heavy duty steel construction and fits wheel sizes between 9-14 inches. This rack will fit a trailer frame up to 3 inches wide by 5 inches tall. The steel bracket has a zinc plated TUFFPLATE finish.

The carrier has a measurement of 4-1.2 inch side offset and 4-3/4 inch high offset from box. This bracket will only fit on 5 on 4-1/2 bolt pattern.

I attached a review video link below.

expert reply by: Noah E

0

Answer 1

I checked into this with Dutton-Lainson, and the limitation on the #DL22120 offset spare tire has to do with the weight of the 15 inch tire and wheels, and not with the physical size. The welds on the carrier are not rated to handle the weight of…

view full answer...

Answer 2

I did some searching online and found that the tires for your 2018 Aluma 548 trailer are ST175/80R13 Radial with a Load Range of C (1,360 lbs at 50 psi). They are mounted on Aluminum wheels that have a 5 on 4-1/2 inch bolt pattern. I recommend…

view full answer...

Answer 3

I spoke with my contact at K-Source and he said that with the OEM memory feature on your 2003 Chevy Silverado to disengage it you will need to turn off the Curb Assist feature. If you do not turn off the Curb Assist feature the mirror will not…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The Ultra Fab spare carrier part #UF15-954730 would work well as a carrier as it was designed to fit 4 inch bumpers like you have and can carry the size wheel tire you mentioned. If your wheel has a 6 bolt pattern you'd want the part #AM32680 or…

view full answer...

Answer 6

The Demco Spare Tire Carrier for up to 4" Trailer Tongue - Silver #DM15851-52 only comes with the trailer installation mounting hardware. The carrier does not come with the hardware to mount your spare tire on the carrier. This includes the…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

I really like the Curt Trailer Hitch Receiver #C14108 for your 2005 Chevy Silverado 2500HD Short Bed because it has a hidden crosstube and is a Class IV rating so it's nice and sturdy for up to 10K trailers or 12K trailers if a weight…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Spare Tire Carrier For A 2023 Aluma 548 ES Trailer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching