Is the Garnish for Fan-Tastic Vents Roof Vent FVK2040-80 Square and Can it Be Trimmed

Question

Question:

Need to know if product FVK2040-80, off white is actually square? Mine is an old model Im replacing and must be square to fit vent . Cant use rounded corners. Do you have one with only a 2 or 3 inch frame/ down. ? Please let me know before I purchase Thanks

asked by: Jim G

0

Expert Reply:

The Garnish for Fan-Tastic Vents Roof Vent # FVK2040-80 is square, but it does have a slight round at the corners. The Garnish for Fan-Tastic Vents Roof Vent # FVK2040-80 is the most square ceiling garnish that we have, it has the least amount of round at the corners and it can be trimmed down to the 2 or 3 inches you are needing.

expert reply by: Scott S

0

Answer 1

In order to make sure you get the correct ceiling garnish for your application, you're going to want to measure from outside edge to edge as well as the depth. For instance, the Garnish for Fan-Tastic Vents Roof Vent #FVK2040-80 measures…

view full answer...

Answer 2

It sounds like you have the standard garnish for Fantastic Vents, but you will need one more measurement to make sure you get the correct one. This being the height of the leg. The Fantastic Vent Ceiling Garnish #FVK1060-80 will have a 6" leg…

view full answer...

Answer 3

The Garnish for Fan-Tastic Roof Vents part #FVK2040-80 is an off-white roof garnish that is 4-1/2 inches deep and was designed to be used with the Fan-Tastic vent 1450 that you have.

view full answer...

Answer 4

When you need to trim a roof vent's plastic garnish trim ring like part #FVK1060-81 it is best to do so indoors so that the plastic is at room temperature. This will reduce its brittleness and chance of cracking or shattering. The warmer the…

view full answer...

Answer 5

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

view full answer...

Answer 6

The correct replacement for an Atwood Water Heater GC6AA-9E is the Dometic RV Water Heater part #DMC74FR. This is a 6 gallon water heater that works with both gas and electric just like the one you have so it will be an exact match.

view full answer...

Answer 7

We do carry the Dometic RV Water Heater #DMC74FR which you could use to replace your Atwood G6A-8E 6 gal RV Water Heater, but I highly recommend switching over to a tankless system like the Furrion RV Tankless Water Heater 60,000 BTU #FR98SR. This…

view full answer...

Answer 8

The best replacement option we offer for a Atwood GC10A-4E Water Heater is tankless, the Furrion RV Tankless Water Heater part #FR68SR. It won't be a direct replacement but still pretty easy nonetheless as they are very similar. That said, you…

view full answer...

Answer 9

The only tank equipped RV water heat option we currently offer is the Dometic RV Water Heater part #DMC74FR which is a 120 volt unit with 6 gallon tank and gas/electric operation. In regards to installation, this must be performed by a qualified…

view full answer...

Answer 10

To replace your Atwood RV Water Heater, Model #GC10A-4E, the direct replacement is the Atwood RV Water Heater - Gas and Electric - part #AT94022. This is the new version of your existing water heater, so it will have all the same features like a…

view full answer...

Answer 11

To install the Dometic water heater part #DMC74FR in place of your current Dometic setup what you need is the adapter part #DMC24FR and you'd be set.

view full answer...

Answer 12

Our installers and customer experiences have led us to believe that the Furrion tankless heaters like the part #FR98SR are by far the best and most reliable so that is what I would recommend. Not saying that the Fogatti is a piece of junk but the…

view full answer...

Is the Garnish for Fan-Tastic Vents Roof Vent FVK2040-80 Square and Can it Be Trimmed

Product Page this Question was Asked From

Continue Researching