bing tracking image
Q & A Icon

Troubleshooting Picture Issues With Furrion Vision S Sidemarker Cameras  

Question:

Side cameras are paired but images are scattered and you can not make out what the picture is. Rear view camera works perfect.

0

Expert Reply:

Since the rear camera is functioning correctly it sounds to me like the side cameras of your Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras # FCE48TASL-05 might not be getting 12v.

I recommend unmounting them and testing the power wire with a multimeter # PT89ZR and seeing if you have a full 12v to the cameras. You'll need to prick the tester leads into the wires to get an accurate reading and can then cover the holes with some electrical tape.

If you do not read 12v then you will need to install the PWM Filter # VGR64VR at both side cameras to boost the power to them and clear up the signal. Installation is super simple so you can easily do this yourself. I've attached a video below that will walk you through this.

If you are reading 12v then the sidemarker cameras have some sort of internal issue that's weakening the connection between them and the monitor and will need to be replaced.

expert reply by:
0
Kevin C

Products Referenced in This Question



Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>