Will the SolidStep Locking RV Storage Box Stick Out from the Trailer Sides

Question

Question:

How far will it stick out add to depth once bolted on.

asked by: R. N

0

Expert Reply:

The SolidStep Locking RV Storage Box part # LC664640 is designed to fill the void left over from the old manual pull-down steps when using the fold-up Lippert SolidSteps. The box itself measures 27-1/4" long x 11-5/16" wide which will fit most existing cutouts nicely. I took a look at some of our neighbor's installs and the box does not protrude from the trailer sides in any of these applications, it sits flush or slightly behind on most trailers.

Please note, the box does require an I-beam frame of 8" or larger for proper installation.

expert reply by: Conner L

0

Answer 1

The MORryde Locking RV Storage Box #MR43RR sits close enough to the stairs that I don't think you'll have the ability to open up the door. If you already have the steps installed you can mock up the door to see if it will open with out any…

view full answer...

Answer 2

Best solution would be the Advent Air Unit part #ACM135 which was designed for an application like your horse trailer that doesn't have ducting. It has a heat strip that comes with it too which helps provide a decent amount of warmth but it's…

view full answer...

Answer 3

Here are the steps to prepare your 2023 Ford Bronco Big Bend for flat towing. The transfer case and transmission will be in neutral with the ignition off. This information is in your owners manual. Switching Neutral Tow On 1.Switch your vehicle to…

view full answer...

Answer 4

To add two side cameras to your Furrion Vision S Wireless RV Backup Camera System with 5" Screen #FOS05TASF, you can use the Marker Light RV Side Cameras #FCE48TASL. I can understand your concern with the trailer having all LED lights, but it…

view full answer...

Answer 5

Since you're powering the Furrion Vision S RV Camera System #FCE48TASL-05 off of the trailer battery instead of the tow vehicle it wouldn't be a PWM wiring issue like you're suspecting. Where exactly do you have the trigger wire ran to?…

view full answer...

Answer 6

For attaching the JT's Strong Arm Jack Stabilizer Kit #LC191023 to front landing gear the needed brackets are included. I attached a picture that shows how these install to landing gear jacks on the front of a trailer as well as an install video…

view full answer...

Answer 7

The difference is between just the MORryde Locking RV Storage Box #MR43RR and when you add the brackets at their widest setting. Just the box measures 25-3/4" but when you add the mounting brackets is when you'll see that 27-3/4" width…

view full answer...

Will the SolidStep Locking RV Storage Box Stick Out from the Trailer Sides

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching