Recommended RV Storage Cover For A 2003 Keystone Outback Travel Trailer

Question

Question:

Will this fit our 2003 Keystone outback travel trailer? I tried to put in out back in the search engine and it only comes up cougar. Is there anything else we need or is this cover complete. We will be using it to protect trailer from the sun. Adco SFS AquaShed Cover for Travel Trailer - Up to 28-1/2 Long - Gray Item # 290-52244

asked by: Ginger W

0

Expert Reply:

From what I can find your 2003 Keystone Outback Travel Trailer should be 26.5' in length so the Adco SFS AquaShed Cover for Travel Trailer # 290-52244 you referenced would be a fit. You'll want to measure the length of the trailer's body, not including the tongue, to confirm the actual length.

That being said, I recommend the Adco Olefin HD All-Climate + Wind RV Cover for Travel Trailer # AD87ZR over the # 290-52244. The Olefin is rated for use in all climates and can handle much harsher weather than the Aquashed, so you'll get a better performance and lifespan with the Olefin.

expert reply by: Kevin C

0

Answer 1

Yes, the Adco RV Cover #AD27ZR will have side panels that are designed to protect your travel trailer from UV rays so it will work well for you in the Florida Sun. You may also want to consider using the Camco RV Winter Readiness Kit #CAM36190 if you…

view full answer...

Answer 2

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 3

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

view full answer...

Answer 4

The Round A-Frame Trailer Jack #TJA-5000S-B outer tube is 2-1/4" thick so the pilot hole in the frame would need to 2-1/4" or larger in diameter. The mounting holes are oblong and are 3/4" long x 7/16" wide with a center to center…

view full answer...

Answer 5

Yes we do have the replacement screen/frame for your trailer vent. It is #BVD0434-31 in birch white or #BVD0434-41 in polar white which is a brighter white. These screens fit Ventline Ventadome roof vent models V2092, V2110, V2094 and V2119.

view full answer...

Answer 6

For your Heartland Mallard IDM245 travel trailer that is 26 feet from bumper to apex of the curve on the front of your trailer our best option for UV protection is the Adco Olefin RV Cover #AD87ZR. The top material is Olefin which is considered to be…

view full answer...

Answer 7

The spec sheet for your 2014 Lance 2285 shows it's 27' long so I recommend the Adco Olefin HD All-Climate + Wind RV Cover for Travel Trailer #AD87ZR. This cover is rated for all climates.

view full answer...

Answer 8

The Round A-Frame Trailer Jack #TJA-5000S-B has mounting holes that are elongated. The actual holes are 3/4 inch long and 7/16 inch wide. That gives you a minimum of 2-1/2 inches or maximum of 3-3/4 inches to the nearest or farthest part for…

view full answer...

Answer 9

The Curt Weight Distribution Shank #C17132 has an overall height of 14-1/2 inches and an overall length of 12-1/2 inches. The adjustment holes are spaced 1-1/4 inches on center and the distance from the hitch pin hole to the adjustment hole is 8…

view full answer...

Answer 10

The tongue weight capacity of the Curt weight distribution shank part #C17132 that you referenced is 1,500 lbs. I believe that is your only question but if you have any other parts from your WD system that needs to be replaced let me know and…

view full answer...

Recommended RV Storage Cover For A 2003 Keystone Outback Travel Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching