Recommended Hub And Drum Assembly For With A Outer Bearing L44649 And Inner Bearing L68149
Question:
I am looking for a hub and bearing assy for 5 bolt 4.5 outer bearing L44649 inter bearing L68149. Can you help me Thanks
asked by: Bill E
Expert Reply:
When it comes to replacing your hub and drum that has an outer bearing # L44649 and an inner bearing # L68149 The Dexter Trailer Hub and Drum Assembly for 3,500-pound E-Z Lube Axles - 10 inch Diameter - 5 on 4-1/2 # 84546UC3 will work for you.
This hub and drum has an E-Z Lube-compatible grease cap that makes it easier to lubricate the bearings. The grease cap flange diameter is 1.986 inches and has a wheel bolt diameter of 1/2 inch. All bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included.
I attached a review video link below.
Products Referenced in This Question
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44649
- L44649
- For 2700 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- CE Smith
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Replacement Hub Assembly For EZ Loader Trailer Hub 300-020883
- Q&A: Replacement Trailer Hub for an EZ-Loader Boat Trailer
- Article: Gooseneck to 5th Wheel Adapters
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: How to Find Correct Replacement Hubs for Shorelandr Boat Trailer
- Q&A: Replacing Short Hubs On A 1996 EZ Loader Trailer With Straight Spindles
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Replacement Slipper Springs for EZ Loader Trailer with 26-1/4 Inch Springs
- Article: Printable Trailer Bolt Hole Pattern Template