Is It Normal To Hear A Clicking Noise Coming From A 2-Wire To 3-Wire Converter Box
Question:
I just installed the wiring kit on my buick but one I added the two relay switches all you hear is clicking eventide you hit the brakes or turn signals. Is that normal and/or is there a fix or replacement to stop the clicking? Thanks
asked by: Brian C
Expert Reply:
While it's not unusual to hear some clicking from the relays inside of the Vehicle to Vehicle Tail Light Converter # 118158 it can be an indicator that you may have a short in your wiring. I recommend checking the wiring for any damage or loose connections as well as checking to ensure that you have a good ground.
You'll also want to test your light functions to ensure that the converter box is properly operating as well.
Product Page this Question was Asked From
Vehicle to Vehicle Tail Light Converter
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 7 Round
- 7 Round
- Tow Ready
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: How to Get Separate Turn Signals and Brake Lights to Work on a Trailer
- Q&A: How to Wire a Third Brake Light on Trailer
- Article: Trailer Wiring Diagrams
- Article: Diode Installation Instructions for a Dinghy with Separate Tail Light Wiring
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Tow Bar Wiring Overview
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Tow Bar Wiring: Which Wiring Kit is for You?
- Q&A: Battery Charge Line Kit Needed for a Motorhome to Towed Vehicle
- Q&A: Is Separate Diode Needed to Install Charge Line Kit Flat Towing 2024 Ford Maverick
- Q&A: Does Battery Charge Kit from Towed Vehicle Have Potential to Damage Tow Vehicle Battery
- Q&A: Grease to Oil Bath Trailer Hub Conversion Kit for 3500 Pound Axles
- Q&A: Getting Side Marker Lights to Function as Turn Signals and Running Lights
- Article: The Definitive, Step-by-Step Flat Towing Setup Guide