Is There a Replacement Ball and Flush Kit for Dometic Model 311 Toliet  

The main difference between the Dometic 310 Part-Timer RV Toilet #DOM57FR and the Dometic 311 Part-Timer RV Toilet #DOM67FR is that the 310 is standard height (20" tall) and the 311 is a low profile (15-1/2" tall). Both toilets will…

For a great low-profile toilet, I recommend the Dometic 311 Part-Timer RV Toilet - Low Profile #DOM67FR. Not only does this toilet only measure 15-1/2 inches high, I confirmed with Dometic that the trap stays open while the pedal is compressed. The…

Our Dometic Part Timer RV toilet part #DOM67FR is the same as their 311 Series which this model is the part number of theirs 9108923945.

The Dometic #DOM67FR rough in measurement is 10".

We do have toilets that will work for you, but that specific toilet is no longer available. Instead, for a low-profile Dometic toilet that is a gravity flush with a foot pedal, you can choose from one of the following: - Dometic Part-Timer RV…

The Dometic 311 Part-Timer RV Toilet #DOM67FR does not come with the hand sprayer but you can add it with the Installation Kit #DOM75FR. I confirmed this with my contact at Dometic.

I have the perfect toilet option in the Dometic Weekender RV Toilet part #DOM24FR which is compact at 15-1/2" tall x 19-1/2" long. It is like most RV toilets designed to dump directly into the waste tank. It uses very little water…

The Dometic Part-Timer RV Toilet - Low Profile - Round Bowl - Slow Close Lid - White Ceramic Item #DOM67FR comes with only a round bowl. The Dometic Full-Timer RV Toilet - Low Profile - Elongated Bowl - Tan Ceramic Item #DOM99FR is the only low…

Dometic has recalled the 301's and ensured that the other models don't follow in the same design. The replacement you're looking for is with the 310 or 311 models, of which we have two options; the #DOM24FR is made of polypropylene and…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…