Short Lightweight Shelves For Enclosed Utility Trailer

Question

Question:

Can we get the individual trays custom sized? I need smaller trays in length. No longer then 25. Is that possible?

asked by: Errol P

0

Expert Reply:

I took a look at the Tow-Rax Utility Tray w/ Raised Sides # TWSP12AT that you mention, and while this shelf is not able to be customized, I may have another solution for you.

The closest I was able to get to your 25" requirement is the Tow-Rax Double Helmet Shelf w/ Hanging Rod # TWSP280HSA.

This tray measures 28" long, 7" tall and 15" deep, and is a made of a lightweight aluminum.

I have included a review video of # TWSP280HSA for you to check out as well.

expert reply by: Bryce D

0

Answer 1

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 2

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 3

From the top of the B and W Tow and Stow part #BWTS10043B down to the bottom of the unused ball when it is in it's lowest position measures 14 inches. The 7 inch drop version part #BWTS10040B instead has this distance at 12 inches.

view full answer...

Answer 4

Thanks for reaching out, Michael! The Dexter Electric Trailer Brakes #K23-086-087-00 are compatible with 3,500 lb axles and have the standard 4-bolt pattern so if that matches the specs of your axle then this will definitely work for your…

view full answer...

Answer 5

The Brophy Utility Shelf for E-Track - 18" Wide x 10" Deep - Black #ETLSB is not rated for a certain weight, so I wouldn't trust it for your 52 lbs when traveling. Instead I recommend using the CargoSmart Shelf Brackets for E-Track or…

view full answer...

Answer 6

You will be okay to mount the Fulton Hi-Mount Spare Tire Carrier - Fits 4- and 5-Lug Wheels Item #FSTC1000301 to your cargo door as long as your door can support the weight and secure the mount. The photo you attached looks like the hinges are sturdy…

view full answer...

Answer 7

We have a folding table that our customers have mounted to the outside of an enclosed trailer. Check out the Tow-Rax folding table, #TWSP45HFTA. This table is 45-1/2" Long x 18-1/2" Wide and when folded would only add about 3 inches of…

view full answer...

Answer 8

There is an easier solution that a different jack. You can use a longer ball mount so that the trailer, and the jack, will be further away allowing you to lower the tail gate without hitting the jack. Then you could use any jack you wanted. If that…

view full answer...

Answer 9

Take a look at the Ultra-Fab Electric A-Frame Jack, #UF38-944014 with 2-1/4 inch outer tube diameter, and #UF38-944016 with 2 inch outer tube diameter. Both of these jacks could be mounted so that the motor housing is facing the front of the trailer…

view full answer...

Answer 10

I see you have tried the usual fixes for a coupler that won't release the hitch ball - moving the vehicle slightly to potentially release excess tension on the ball, lubrication with WD-40 and even a little brute force with the pry bar. You can…

view full answer...

Answer 11

Light truck tires (LT) are sometimes used in RV applications but generally not on utility trailers. Light truck tires are a type of passenger vehicle tire and as such they are not built with as thick of a sidewall as trailer tires. A thicker sidewall…

view full answer...

Short Lightweight Shelves For Enclosed Utility Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching