Replacement Landing Gear Needed for 2008 Fusion Toy Hauler

Question:

I have a 2008 Fusion Toy Hauler with a bent front landing leg that I need to replace. Can you point me in the right direction please? Thanks!

asked by: Todd F

Expert Reply:

I'd be happy to help you replace your landing gear!

If you have a sticker to identify what you currently have I can see if we have a replacement for the one leg otherwise we'll need to get you a whole new set to make sure they operate at the same pace. If you have individual landing gear legs that operate at their own pace your toy hauler will always be unlevel.

To replace your landing gear the only things we really need to know are the weight capacity of your current landing gear and the distance between the weld stops on the sides of your landing gear legs. Our Landing Gear Set w/ Handle # RVLG-8HDL is rated for 8,000 lbs and measures 15-1/2" between the weld stops which is pretty standard for landing gear. This is manually operated but you can add a Motor # LC142178 and Switch # LC145236 to operate them via battery power.

If you wanted to upgrade that a little further we have the Reese set # RP500708 which has the same weight and weld stop specs but this has individually operated landing gear so you can adjust each leg on an as-needed basis.

Attached are some videos I shot on these landing gear options for you to check out. If you have different weld stop locations please let me know and I can help you find a replacement.