Recommended Trailer Hitch For A 2013 Kia Soul
Question:
is there an installation kit for 24839 hitch for a 2913 kia soul
asked by: Chuck L
Helpful Expert Reply:
When it comes to installing a trailer hitch on a 2013 Kia Soul The Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 inch # 24839 comes will all the required hardware to install it to your vehicle.
The hitch has a concealed tube which keeps the car with the factory sleek look after the hitch is installed. The hitch has a bolt-on installation with no welding required, and has a black powder coat finish that covers an e-coat base for superior rust protection.
The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118637 will make it to where your trailer's brake, stop, and turn lights mirror your vehicle's brake, stop, and turn lights. The harness connector plugs into your vehicle's wiring harness, which is located behind the tail lights on both the driver's side and passenger's side. You will need to remove three screws on each side to access the harness.
Once installation is complete the 4-way connector will be stowed beneath your, near the trailer hitch. A Mounting Bracket # 18144 is recommended to keep the connector secure. This bracket is sold separately.
If you already have the hitch then you would need The replacement hardware kit # RHK.
I attached a couple installation video links below.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Replacement Hardware Kit for Trailer Hitches
- Accessories and Parts
- Trailer Hitch
- Hardware
- etrailer
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 750 lbs TW
- 5000 lbs GTW
- 8000 lbs WD GTW
- 2 Inch Hitch
- 800 lbs WD TW
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: My Trailer Hitch Doesn't Fit
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Hitch and Wiring for 2024 Nissan Frontier
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Are Relays Required to Activate the Trailer Wiring Harness on a Nissan Frontier
- Q&A: Installation Torque Values/Specs for Draw-Tite Trailer Hitch # 75282
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Trailer Hitch Installation Tips
- Q&A: Recommended Hitch for a 2024 Toyota Grand Highlander
- Q&A: Bolt Hole Dimensions For Mounting Draw-Tite Max-Frame Trailer Hitch Receiver # 75282