Recommended Brake Controller For A 2018 Chevrolet Traverse  

Question:

Helpful Expert Reply:

When it comes to installing a brake controller in your 2018 Chevrolet Traverse with factory tow package I recommend The Curt Echo Wireless Trailer Brake Controller - 1 to 2 Axles - Proportional # C51180.

This controller automatically adjusts trailer's braking based on deceleration of tow vehicle. The controller has a fast, plug and play installation with no tools required. The controller has a user-friendly, app that lets you connect, monitor, and control all of your trailer's braking activity. For the initial pairing to your smart device there is a Bluetooth PIN in the quick reference guide.

If your 2018 Chevrolet Traverse does not have a factory towing package you will need a few more items listed below:

The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56394 which plugs in behind the driver's-side rear bumper.

Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires # ETBC7. This wiring will attach to the 4 flat and made the 4 flat into a 7 round and 4 flat. There will be 4 additional wires needed to set up to activate the brakes on your trailer.

Black - 12 Volt Hot Lead
Blue - Electric Brake
White - Ground
Yellow - Reverse Lights

Finally The Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional # 90195 will splice into the ETBC7 and will allow you to help brake your trailer.

The Tekonsha controller has 5 storable settings that you can customize for multiple trailers, varying loads or different drivers. It has a customizable, easy-to-read LCD display that lets you choose color, adjust contrast and pick from different languages. The controller has 3 boost levels that let you adjust initial braking power and aggressiveness.

I attached a review video link and an installation video link below.

expert reply by: Noah E

1

ETBC7 Wiring Diagram
(click to enlarge)