What Replacement Brakes do I Need for My Dexter 7k Axles?

Question

Question:

Looking for all 4 breaks for my trailer. Part # 23-181-00 That’s the right hand side. Also need for the left hand side Can you steer me the right direction 7000# dexter axles

asked by: Mike

0

Expert Reply:

It sounds like you are looking for 2 sets of left/right side brakes for your 7k trailer. If that is the case, we unfortuantely do not carry the 23-181-00 because these are an older brake model that was discontinued from Dexter. However, the new models fit as well. Those are 2 sets of the # 23-180-181. These are direct replacements of your current brakes.

expert reply by: Bob C

0

Answer 1

The difference between the Dexter Electric Trailer Brake Kit - 12" - Left and Right Hand Assemblies - 7,000 lbs #23-180-181 and the #23-105-106 you mentioned are the strength of the brake magnets. The #23-180-181 was designed for 7000lb axles…

view full answer...

Answer 2

The recommended lug nut torque for your 7,000lb axle depends on a few factors like wheel size, stud size etc. Check out the attached photo which shows the torque specs for a variety of applications. I see you were looking at the Dexter Nev-R-Adjust…

view full answer...

Answer 3

To replace/upgrade your RV Tail Light (Stop, Tail, Turn), #RVSTB60 to an LED light, the Low Profile LED RV Tail Light, part #RVSTLB60 would serve as a direct replacement. That's just the passenger side though, so you'll also need the driver…

view full answer...

Answer 4

The Dexter Trailer Brake Assemblies 023-466-00 and 023-467-00 will cross-reference to our Dexter Nev-R-Adjust Electric Trailer Brake Kit part #23-458-459.

view full answer...

Answer 5

I attached a picture that shows the bolt pattern of the trailer brake assembly part #23-180-181 that you referenced.

view full answer...

Answer 6

The only difference between the Dexter Electric Trailer Brake Kit part #23-180-181 and Dexter Nev-R-Adjust Electric Trailer Brake Kit part #23-464-465 is that the latter is self-adjusting which means the pads will automatically adjust for the best…

view full answer...

Answer 7

According to Dexter, the torque should be between 25-50 ft. lbs. when installing the #23-180-181. If you don't already have mounting hardware you'll need the Mounting Bolts and Hardware for 12" Brake Assemblies #BRKH12.

view full answer...

Answer 8

It looks like the Dexter axle part #60826 is a 7,000 lbs capacity axle. To replace the brake assemblies, I recommend the Dexter Electric Trailer Brake Kit - 12" - Left and Right Hand Assemblies - 7,000 lbs item #23-180-181. You will need one set…

view full answer...

Answer 9

I would be happy to recommend the correct replacement electric trailer brakes for you, but the 3175030707 did not cross reference to any brake assemblies. To determine the correct brake assemblies I would need to know the weight rating of your axle…

view full answer...

Answer 10

The brakes you mentioned are for 7,000 lb axles and are 12-inch assemblies, similar to the Dexter Electric Trailer Brake Kit #23-180-181, but that is just one part of the equation in regard to determining the correct hub and drum. In order to…

view full answer...

Answer 11

The Dexter Electric Trailer Brake Kit #23-180-181 comes with a left hand and a right hand assembly. If you are needing 4 assemblies you will need to purchase 2 sets of this kit. You can check out the assemblies in the review video I linked for you.

view full answer...

Answer 12

I'd set aside about two hours or so to do a brake assembly install like with the Dexter Trailer Brake Kit part #23-180-181 if it's your first time doing so. It's not a hard process but if you wanted to take your time with it I am sure two…

view full answer...

What Replacement Brakes do I Need for My Dexter 7k Axles?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching