Replacement Hub for Restoring Older Trailer
Question:
Hello, I’m restoring an older trailer and I’m trying to replace the hubs. I pulled the old ones off and found the id numbers on the bearings. I found hubs on your website that list those bearings as the inner and outer. Am I safe to assume the hubs on your site will fit or is there another measurement I need? For a 3500 lbs axle…
asked by: Ryan D
Helpful Expert Reply:
Yes, it is probably safe to assume that a hub using the same bearings will fit the spindle on your trailer. I'm not sure what "older" is so you may also want to measure the spindle to find the inner diameter of the grease seal. Or if there is a part number on the old one that could be used to identify it. The other thing you want to do is match the bolt pattern.
If you were looking at using the CE Smith Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2 - Pre-Greased # CE13611 this uses a # 58846 grease seal. The inner diameter of this seal is 1.719". More than likely this is what you have since it is the most common seal for a 3,500 lb axle.
Products Referenced in This Question
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Product Page this Question was Asked From
CE Smith Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- CE Smith
more information >
Continue Researching
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 6 on 5-1/2 - Pre-Greased
- Search Results: axles
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Shop: Replacement Trailer Hub Bearing - 15123
- Shop: Bearing Kit, 15123/25580 Bearings, GS-2125DL Seal
- Shop: Replacement Race for L44643 and L44649 Bearings
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Search Results: l44610
- Search Results: bearing 15123
- Search Results: 3500 lb axle
- Search Results: hub
- Search Results: trailer axle
- Q&A: Replacement 3,500LB Spindle and Idler Hubs For Obsolete Trailer Spindle 1.375" Inner, 0.75" Outer
- Q&A: 5x4.5 to 6x5.5 Hub Conversion on Trailer
- Article: Most Popular Wheel Bearings
- Search Results: axle bearing
- Q&A: Where to Measure on Trailer Spindles to Determine Replacement Hubs
- Q&A: What are the Dimensions of a #99 Spindle
- Video: Choosing the Right Trailer Wiring
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Q&A: How Many Transfer Switches are Needed to Switch from Shore Power to a Genreator, and An Inverter?
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Tire Sizing
- Q&A: Does HBA-CAM Adapter Module for Hydrastar Electric Over Hydraulic Brake Actuators have 2 or 4 Wires
- Video: Choosing the Right Brake Controller