How To Find Correct Bearing Kit for CrossRoads Sunset Trail Travel Trailer

Question

Question:

I have a 2012 sun set reserve 33 ft travel trailer. Im looking for rear axle wheel bearing kit. gvwr 9275.00lb.Thanks

asked by: Ray A

0

Expert Reply:

In order to choose the correct replacement wheel bearing kit for a CrossRoads Sunset Trail Travel Trailer you'll need to know the axle capacity which is printed on the tag in the center of the beam. The trailer likely has 4,400 lbs axles and in which case the Hub Bearing Kit for Lippert, Dexter, and Al-Ko Axles part # BK2-100 would be correct.

I have attached a full list of all other bearings kits below as well you can sort through once you find the axle capacity.

expert reply by: Conner L

0

Answer 1

The 10" x 2-1/4" Electric Brake Shoe/Lining (One Wheel) #BP04-095 are the brake shoes for the Dexter electric brakes and they will fit the Axletek brand just fine. The #AKBRKR-S-10 are also a fit for your 4,400 lb axles.

view full answer...

Answer 2

It is perfectly safe to use a reducer sleeve like the Curt #C45405 to fit an accessory with a 2" shank into your 2-1/2" trailer hitch receiver. We do have options for you to use a ball mount with a 2-1/2" shank for when you want to tow…

view full answer...

Answer 3

On the Lippert High-Speed Power Stabilizer Jack 337199 it would appear that the only parts of the legs that are replaceable are the Electric Stabilizer Jack Support Arm #LC1134122 and the Foot Assembly #LC157584. If the black arms are buckled then…

view full answer...

Answer 4

While the Portable Power Watchdog Surge Protector #HU67FR can be plugged into a 15 or 20 amp outlet using an adapter it wouldn't offer much surge protection for that circuit since the circuit would need to prevent surges above 15 or 20 amps…

view full answer...

Answer 5

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 6

Yes, the Timken Bearing Kit #TMK52VR will fit your 3,500 lb axle as it fits an standard #84 spindle. The only time this kit won't fit with a 3,500 lb axle is if the trailer/axle is made before the 2000's since that's about the time that…

view full answer...

Answer 7

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Answer 8

The Dexter bearing kit part number K71-717-00 that you referenced is the bearing kit for a number 84 spindle. Our part number for that bearing kit is #BK2-100.

view full answer...

Answer 9

Depending on how the trailer was made, there will be a few spots you can check to identify the axle. First, if the trailer was pre-made by a specific company, you may be able to find this information in either the paperwork or on a placard somewhere…

view full answer...

Answer 10

Hey Roy, The only U-bolt kit we currently only offer for 1-1/2" square axles is part #CE23102, which only has a 3-3/8" length so it likely wouldn't be the best option for you. Instead you'll want to order the 1-1/2" Square…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

How To Find Correct Bearing Kit for CrossRoads Sunset Trail Travel Trailer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching