Question About a Product

Question

Question:

i have a morryde 2nd generation 3 step do they make strut assist or lift assist you can add to them stp-007mr-326-09 this is model number and how much is it or will the solid step lippert work

asked by: Charles C

0

Expert Reply:

We've checked with MORryde in the past on this and they do not offer a way to add a strut assist to the StepAbove step kits.

expert reply by: Jameson C

0

Answer 1

To solve your step issue I recommend the MORryde StepAbove Fold-Down Steps for 23-3/4" to 26-1/4" RV Door Frames - 8" Drop Item #MR98RR. This will bolt right onto the bottom portion of the door frame instead of the sides and has…

view full answer...

Answer 2

You are right on. The 8" rise/drop on the MORryde StepAbove Fold-Down Steps #MR98RR is the height between the steps. The #MR48RR you were looking at has a 9" rise/drop meaning the distance between the steps is 9". The #MR98RR is…

view full answer...

Answer 3

Great questions. I have solutions for both questions. Lippert does not sell replacement bolts or hardware kits for this application you will be able to source the bolts you need from any local hardware store. As for a replacement options I strongly…

view full answer...

Answer 4

Since your narrowest entry width is 24", and your entry height is between 22" to 28", the best fitting Lippert Solid Step is part #LC713662. If your measurements are different you can pick the part number from the table below. Once you…

view full answer...

Answer 5

To replace your current MORryde StepAbove RV Steps you need one of the following: - Standard #MR48RR - With Strut Assist #MR45RR When I reached out to MORryde with the part number you gave me they said that's an OEM number which is why you're…

view full answer...

Answer 6

The length Dexter posts for their leaf springs is the flattened length, so with the 072-042 having a length of 26" you would want to compare that to our 25-1/4" long springs as we measure their length with the spring relaxed. The 3-Leaf…

view full answer...

Answer 7

While we do not carry that particular Lippert step we do have the similar MORryde #MR98RR or a better option in my opinion is the TorkLift GlowStep #TLA9104. I prefer this step as it folds up nicely and works better in tight areas like storage lots.…

view full answer...

Answer 8

Hey Jeff, from previous customers who have given us the part number you mentioned we have found that the matching MORryde StepAbove is the part #MR65RR which has 23.5 inch wide steps and is a 3-step setup with the strut assist.

view full answer...

Answer 9

Hey Beatrice, To find the right fit for your trailer's suspension you'll need to take a quick measurement of your current shackle straps. You'll need to measure from the center of one bolt hole to the center of the other bolt hole. The…

view full answer...

Answer 10

I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but they…

view full answer...

Answer 11

Hey Dave, the MORryde upgraded shackle kit part #MR76ZR that you referenced is compatible with your 2020 Grand Design 2670MK and the Lippert Road Armor equalizers.

view full answer...

Answer 12

The difference is between just the MORryde Locking RV Storage Box #MR43RR and when you add the brackets at their widest setting. Just the box measures 25-3/4" but when you add the mounting brackets is when you'll see that 27-3/4" width…

view full answer...

Question About a Product

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching