What 2-Bike Hitch Rack do You Recommend for 2 Cruiser Step-Thru Bikes?  

Question:

Expert Reply:

As far as the economical Curt Bike Rack # C18085-FB, this rack works. However, you need the additional bike frame adapter bars # 64005 for each bike in order to attach to the hooks of the rack. Also, the # C18085-FB is the fat bike version that is constructed for bikes with up to 4.88" wide tires. If you have standard tires up to 3 inches wide, you need the # C18085 for the more economical cradles.

Another important factor to consider with the Curt bike racks is the shank length. The shank only measures 3 inches from the center of the pinhole to the closest part of the rack when folded up. In order to make sure that the rack doesn't interfere with your rear bumper, I recommend measuring the center of your hitch's pinhole to the outside face of your bumper. As long as that is less than 3 inches long, you won't have an issue.

It is important to note that both Curt racks require you lifting the bikes fully off the ground. If you are open to a bike rack with a ramp and also has a longer 5" shank, I recommend using the Yakima OnRamp # Y36FR (for 2" hitches) or the # Y96FR (for 1-1/4" hitches). In addition to having the ease of loading your bikes by simply wheeling them onto the platform, you do not need bike frame adapter bars because of the versatile design of the cradles. Since the maximum tire width for the OnRamp is 3.25", you need fat tire straps # Y23FR if you have fat tire bikes. The OnRamp has a much better overall construction than the Curt racks and will give you more longevity.

I went ahead and attached some videos for you to check out.

If you need a compatible hitch receiver, feel free to respond to this answer with your year/make/model of vehicle and I will be happy to recommend the best hitch.

expert reply by: Bob C

0