Dimensions of the Rack'Em Grass Catcher for Bobcat Lawn Mower

Question

Question:

What are the outline dimensions of this grass catcher. It will go on a bobcat 2022 model zt2000 with 48-in fabricated deck with welded on bracket.

asked by: Mel

1

Helpful Expert Reply:

Thanks for the pics! I would be happy to help you. We do not have the Rack'Em Grass Catcher for Bobcat Lawn Mower Deck with Built-in Bracket item # RCMMS4-RS2 available to measure so I reached out to Rack'Em and they gave me some approximate dimensions of 21" wide x 30" long on the curved side and 16" tall. I have linked a diagram I made below.

expert reply by: Jerred H

1

Rack'em Grass Catcher Dimensions
(click to enlarge)

Bob Cat Mower Pic
(click to enlarge)

Bob Cat Mower Deck Pic
(click to enlarge)

Answer 1

I checked with Rack em and for your Bobcat Quickcat the correct Rack'em Grass Catcher is the part #RCMMS4-EXS1 that you referenced.

view full answer...

Answer 2

The Rack'em Grass Catcher for Toro, Bobcat, and Exmark Lawn Mower #RCMMS4-EXS1 that you referenced is a fit for the Bob Cat mower you sent a picture in of. Since your Bob Cat has a standard dock that discharges even with the rear tires this will…

view full answer...

Answer 3

So long as your Bobcat lawn mower has the built-in bracket the Rack'em Grass Catcher for Bobcat Lawn Mower Deck with Built-in Bracket #RCMMS4-RS2 will fit and work without any additional components needed. I wasn't able to verify if your…

view full answer...

Answer 4

Yes, since the deck does extend out past the rear wheels of your 2019 Bobcat XRZ Pro RS ZERO Turn 61 the Rack'em Grass Catcher for Bobcat Lawn Mower Deck with Built-in Bracket #RCMMS4-RS2 that you referenced will fit and work well.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

The Rack'em Grass Catcher for Scag Lawn Mower with Velocity Deck #RCMMS4-OVBS1 comes with the faceplate you need along with all hardware needed for installation. The extension you are seeking is the Extension for Rack'em Multi-Mount Grass…

view full answer...

Answer 7

The correct Grass Catcher for your Scag Liberty Z48 is the part #RCMMS4-OBS1.

view full answer...

Answer 8

If your Toro Titan HD has a regular deck you need the #RCMMS4-EXS1. If you have the Z-Cut deck you need the #RCMMS4-EXS1-TORO instead. If your deck isn't one of these two you could still use the Rack'Em Multi-Mount Grass Catcher #RCMMS4 but…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Because the face of the magnet rides against the armature (inside) surface of the brake drum, any grooves that had previously been worn into the armature surface will cause the magnet to wear unevenly. For optimal braking performance, you want…

view full answer...

Dimensions of the Rack'Em Grass Catcher for Bobcat Lawn Mower

Product Page this Question was Asked From

Continue Researching