Replacement Awning Strip Light for 2019 Keystone Cougar with 2 Solera Awnings

Question

Question:

Need to replace both light strips in awnings. Light strip installs in channel of awning mount against outside wall. Must be narrow in width to fit in this channel. Will this light strip work? LC24PJ Keystone Cougar 2019 , 2 Solera Awnings

asked by: Denise A

0

Expert Reply:

You could use the part # LC24PJ but this is a strip that installs with an adhesive. If you instead were wanting something to fit the track you have on your Solera awning the correct replacement strip would be the part # LC25VR.

expert reply by: Jameson C

0

Answer 1

I checked with Lippert and the fluid recommended for their hydraulic auto leveling system is automatic transmission fluid with Dexron III or Mercon 5 fluid.

view full answer...

Answer 2

This is fairly common when receiving anything shipped in a coil-like shape like the LED Fabric Light Kit with Switch/Plate for Solera RV Awning #LC674283. One of the best things to do is to grab one end of the light strip and to firmly (but…

view full answer...

Answer 3

The LED Fabric Light Kit with Switch/Plate for Solera RV Awning - 21' Long #LC674283 can but cut to fit your 20' Solera RV awning. According to Lippert, this LED kit is for 16'-21' awnings and is designed to be cut down to fit…

view full answer...

Answer 4

We do have what you need, but the Vista Light LED Kit for Solera RV Awning #LC25VR is designed to add lighting to your Solera awning. Since you already have lighting on your awning you would want the Replacement LED Light Strip for Solera RV Awning…

view full answer...

Answer 5

Based off of the awning this arm, part #LC375994, works for your awning and fits either side of your awning.

view full answer...

Answer 6

Yes the LED Fabric Light Kit with Switch/Plate for Solera RV Awning #LC674283 does fit the Solera awning you have on your 2020 Forest River Sabre. Thanks for adding the picture as that made it very easy to determine!

view full answer...

Answer 7

Yes Anne, there is an adhesive backing on the Vista LED light kit part #LC24PJ.

view full answer...

Answer 8

I contacted Lippert to ensure the correct item, thanks for attaching the image of the tag on your specific awning. We now have the Vista Light LED Kit for Solera RV Awning, #LC24PJ, available that is a direct replacement to your component.

view full answer...

Answer 9

For a replacement LED Light Strip for your 12 foot Solera awning the part #LC423331 is what you'd need and can be cut to the length you are wanting but it does not change colors.

view full answer...

Answer 10

The Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter #DM8550045 weighs approximately 125 pounds. Most of that weight is the base. I have included a link to a video review for you.

view full answer...

Answer 11

To answer your initial question, the base is 22" square, so the measurement from the ball center to the back edge nearest the cab is 11-1/2 inches. Additional, the flat metal at the back of the hitch nearest the cab is 2-3/4 inches wide. I have…

view full answer...

Answer 12

From your pictures, it looks like you have a plastic bed liner in your 2004 Ford F-350. The Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter #DM8550045 requires that the hitch have direct contact with the truck bed and cannot be installed on…

view full answer...

Replacement Awning Strip Light for 2019 Keystone Cougar with 2 Solera Awnings

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching