Fitment of Westin 50-6245 Truck Bed Mat for 2005 Tundra Double cab

Question

Question:

Does this mat fit the 74.4 inch bed on 2005 Tundra Double Cab? Thanks

asked by: Robert B

0

Expert Reply:

The Westin # 50-6245 fits the 6 foot bed of a 2000-2006 Toyota Tundra. Even though your bed is actually 74.4 inches, the industry still refers to it as a 6 foot bed.

The mat would work great in your truck bed.

expert reply by: Mike L

0

Answer 1

The Westin #50-6245 custom fit bed mat will fit 2005 Toyota Tundra models with the 6 foot bed.

view full answer...

Answer 2

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 3

Hey Deanna, the brake controller I recommend for your 2005 Toyota Tundra is the Redarc Tow Pro Liberty part #RED24FR as it only puts a small knob on the dash of your truck and uses an inertia sensor to determine how hard you are hitting the brakes…

view full answer...

Answer 4

The factory towable bumper on a 2002 Toyota Tundra is one that has about a 1" diameter hole drilled in the center of the bumper for a hitch ball. I have attached a photo of a Tundra with and without a factory towable bumper for you to help…

view full answer...

Answer 5

If you're wanting an all aluminum retractable cover with t-slots then you can use the RetraxPRO XR Hard Tonneau Cover #RTT-80841. This would be compatible with your 2019 Toyota Tundra's 5.5' bed with a deck rail system.

view full answer...

Answer 6

If you're wanting a tonneau cover with t-slots to mount accessories on for your 2019 Toyota Tundra with a 5.5' bed then you'll need the RetraxONE XR Hard Tonneau Cover #RTT-60841 if you have a deck rail system or part…

view full answer...

Answer 7

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain…

view full answer...

Answer 8

the RetraxPRO MX Hard Tonneau Cover #RTX94XR is for select models from 2022-2024 so you would need part number #RT80841 instead. This is for models with a deck rail system, if you don't have one then you'll need part #RT80831…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

For a hard folding tonneau cover that is rack compatible on your 2023 Ford F-150 I recommend the BAKFlip MX4 Hard Tonneau Cover. You will need one of the following based on your bed length: -BAKFlip MX4 #BAK76FR (5-1/2' bed) -BAKFlip MX4…

view full answer...

Answer 11

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Fitment of Westin 50-6245 Truck Bed Mat for 2005 Tundra Double cab

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching