Trailer Hitch for 2017 Ford Escape with 14 inch of Ground Clearance for Ball Mount
Question:
I need a class 2 hitch for the above vehicle to pull a motorcycle trailer that requires 12 - 16inch from the ground to the center line of the receiver. While the bottom edge of the bumper cover is 14 1/4inch from the ground, which would translate to 12 3/4inch to the receiver centerline assuming the receiver was mounted flush to the lower edge of the bumper cover, all of the images I can find seem to suggest that theres a good 1 - 1 1/2inch gap between the top edge of the outside of the receiver and the bottom edge of the bumper cover, which would put me under the 12inch minimum. The item Im wishing to trailer is the Original Slick Wheelie Motorcycle Trailer. Please let me know of the best hitch meeting these criteria. Thanks!!
asked by: Thomas A
Expert Reply:
Going with a ball mount that has a different amount of rise/drop is typically the easiest way to compensate for a hitch height and coupler height that does match up well. Like if you installed the etrailer hitch part # e98866 which has a distance of 14-1/4 from the top of the hitch opening down to the ground you could use a ball mount like the # DT49MR which can do a drop of 2 inches or a rise of 3/4 inch.
Products Referenced in This Question
Draw-Tite Ball Mount w/ 2" Ball for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 2 Inch Ball
- One Ball
- Chrome Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 0 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Draw-Tite
more information >
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Concealed Cross Tube
- etrailer
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Adapter Hardware Needed To Mount JT Strongarm Stabilizers To Round Tube Leveling Systems
- Q&A: Installation of Curt Trailer Hitch Receiver on 2024 Subaru Outback
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Recommended Hitch for a 2024 Subaru Outback
- Q&A: Does Draw Tite Hitch # DT73RR Fit 2024 Subaru Outback Wagon
- Q&A: Easiest Install Trailer Hitch For 2024 Subaru Outback
- Q&A: Difference Between Curt & etrailer Trailer Hitches For 2024 Subaru Crosstrek Wilderness
- Q&A: What is a Concealed Cross Tube Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Determining Trailer Tongue Weight
- Article: My Trailer Hitch Doesn't Fit
- Article: Trailer Hitch Installation Tips
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Choose a Hitch-Mounted Bike Rack